Fall Detection - Suresafe GO Plus User Manual

26

Fall Detection

Your alarm can detect falls by measuring a combination of
changes in air speed, air pressure and impact. When a fall is
detected the alarm will make an audible alert that a fall has
been detected, and the screen will also display that a fall has
been detected. This can be cancelled by pressing the 'X' on
the screen.
When a fall is detected the alarm will ring the 1st number
for 20 seconds. It will also send a text message to the 1st
number that includes a Google Maps link to the location
(usually within 60 seconds of a fall being detected). If there is
no answer to the call within 20 seconds it will then call and
text the second number (unless you cancel it on the watch).
If the 1st number answers, a 2 minute call with two-way voice
communication will be possible.
At the end of the 2 minutes, or if the call is ended within
the 2 minutes, the alarm will call and text the next number
(where there is one). To cancel the call and text to the next
number, press the X that appears on the watch face.
The alarm will then return to standby mode.