Suresafe GO Plus User Manual page 13

13
Switching Your Device On and Off
(and Remotely)
To turn the alarm On, press and hold side button on side for
2 seconds. The watch will play a short tune and you will see
the welcome screen.
To turn the alarm Off, go to 'Settings'.
This is done by swiping left on the screen until you get to
'Settings'.
Tap on 'Settings' and then scroll your finger up to 'System'.
Tap 'System' and then tap on 'Power Off'.
Finally, tap the 'tick' to switch the device off, or tap the 'X' to
cancel switching it off.
You can also turn the SureSafeGO Plus off by sending a text
message to the device.
Text Command: Off
Note: You cannot turn the alarm on using text messages.