Alesis DEQ224 Service Manual page 15

ME1 QC Test Procedures V1.00
Purpose: Explains test procedures for ME1 (DEQ-224) for quality assurance
of sub-assembly electronic functionality and audio fidelity, and final
assembly functionality.
NOTE! These procedures DO NOT contain tests for safety/EMC compliance, or
structural, assembly, or packaging quality.
Original Document Type: Word 2000
Current Revision: 1.00
Revision History:
04/17/2002
04/25/2002
03/05/2003
Questions or Comments Contact
Peter Maresh
Design Engineer, Alesis Studio Electronics, Los Angeles
pmaresh@alesis.com
310-821-5000
Taiho Yamada
ME1 Project Manager, Alesis Studio Electronics, Los Angeles
tyamada@alesis.com
310-821-5000
First production release version.
0.01 Initial Revision. Before Final release, update
software version check.
Peter Maresh
0.02 Added Check to make sure Known Good Front Panel has
been reset in Section 2. Added section numbers.
Peter Maresh
1.00 Adapted from Revision 1.00 of ME2 QC Test
Procedures V1.00 – Approved for Mass Production QC
Taiho Yamada and Peter Maresh