Table of Contents
Advertisement
1.5
M.2 installation
•
•
1.
Completely loosen the screws on the heatsink(s).
2.
Remove the heatsink(s).
3.
Install your M.2 to your M.2 slot(s).
For 2280 length
A.
B.
C.
For 2242, 2260 length
A.
B.
C.
1-12
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
The M.2 is purchased separately.
1
Rotate and adjust the M.2 Q-latch so that the handle points away from
the M.2 slot(s).
Install your M.2 to the M.2 slot(s).
Rotate the M.2 Q-Latch(es) clockwise to secure the M.2 in place.
Install the bundled screw stand to the M.2 length screw hole you wish
to install your M.2 to.
Install your M.2 to the M.2 slot.
Secure your M.2 using the bundled screw stand's screw.
1
2
Chapter 1: Product Introduction
Advertisement
Table of Contents
