Asus 90MB1930-M0EAY0 Manual page 13

6. M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
• Intel
M.2_1 slot (Key M), type 2242/2260/2280
- Intel
• Intel
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8. USB 3.2 Gen 1 Type-C
The USB 3.2 Gen 1 connector (USB Type-C
USB 3.2 Gen 1 module for an additional USB 3.2 Gen 1 Type-C
The connector provides a data transfer speed of up to 5 Gb/s.
9. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen
1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
10. USB 2.0 headers
The USB 2.0 headers allow you to connect a USB module for additional USB
2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
The USB 2.0 module is purchased separately.
11. Addressable Gen 2 headers
The Addressable Gen 2 headers allow you to connect individually addressable
RGB WS2812B LED strips or WS2812B based LED strips.
The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V), and the addressable headers on this
board can handle a combined maximum of 500 LEDs.
Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
TUF GAMING B660M-PLUS WIFI D4
12 Gen Processors
® th
12 processors support PCIe 4.0 x4 mode
® th
B660 Chipset
®
connector
®
) allows you to connect a
®
port.
®
VBUS
SBU2
TX2+
SBU1
TX2-
CC1
GND
VBUS
RX2+
RX1-
RX2-
RX1+
GND
GND
D-
TX1-
D+
TX1+
CC2
VBUS
PIN 1
USB3+5V
USB3+5V IntA_P1_SSRX-
IntA_P2_SSRX- IntA_P1_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P2_SSTX- IntA_P1_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P1_D-
IntA_P2_D- IntA_P1_D+
IntA_P2_D+ GND
PIN 1
ADD_GEN 2
PIN 1
1-3