Remote Control Functions - Harman Kardon DVD 47 Owner's Manual

30016_DVD47_ENG 20/11/06

Remote Control Functions

0 POWER ON: Turns on the player when it is
in standby mode (Harman Kardon logo appears
on screen).
1 POWER OFF: Turns off the player to stand-
by mode.
2 SUBTITLE: When a DVD is playing, press to
select a subtitle language or to turn subtitles off.
Note: Due to the variations in how DVD discs
are authored, the subtitle languages displayed
by the DVD 47 may not accurately reflect the
actual languages available on the disc. It is
recommended that subtitles be selected using
the disc's menu.
3 TITLE: When a disc is playing, press to
make the player go back to the first section of
the disc. If you are playing a DVD-Audio disc
that contains other formats the DVD 47 is
capable of playing, such as linear PCM or Dolby
Digital 5.1, pressing this button may enable you
to switch playback from one audio format to
another.
4 ANGLE: Press to access various camera
angles on a DVD (If the DVD contains multiple
camera angles) or to rotate JPEG images.
5 AUDIO: Press to access various audio
languages on a DVD (If the DVD contains
multiple audio streams).
6 ENTER: Press this button to activate a
setting or option
7 OPEN/CLOSE: Press to open or close the
disc tray.
8 SETUP: Press this button to use the DVD
47's on-screen menu system to adjust the
player's configuration settings. Note that the
Info Button A must be pressed to access the
DVD 47's Player Information menu to obtain
detailed disc information, (lower
selected) and to configure the playback mode of
the disc (when upper
INFO
9 ARROW buttons (
M / N
move the cursor in the OSD.
A INFO: Press for detailed informations on
the disc playing (Video/Audio Bit rate, Movie
aspect ratio and others), and for current player
settings made.
Press again to remove information from screen.
B MENU: Displays the actual DVD Disc Menu
on the TV screen in play mode.
When playing discs with JPEG images, pressing
this button will access the thumbnails.
C PAUSE: Freezes a picture (with DVD/VCD)
and pauses the playback signal (CD) when a disc
is playing. Press again for normal playback.
15:52 Side 9
D STATUS: Press while a disc is playing to
view banner display. Use the ARROW buttons to
move through the different features in the
Banner Display. When a symbol is highlighted,
press ENTER on the remote to select it.
E SKIP (Previous): Press to go to beginning
of current track. Press again quickly to go to
beginning of previous track.
F SKIP/STEP (Next): Press to go to
beginning of next track. After pressing the
PAUSE button, each press of this button will
move the image forwards frame by frame.
G PLAY: Begins to play disc (closes disc tray
first, if it is open.)
H SEARCH/SLOW (REV): Allows you to
search in reverse through a disc while it is in
play mode. Each time you press this button, the
search speed changes as indicated by a number
of arrows on the right top of your screen.
After pressing the PAUSE button, each press of
this button will change the slow down speed
indicated by a number of arrows in the right top
of the screen.
I STOP: Stops playing a disc. When a disc is
playing, if you press STOP and PLAY, the disc will
resume play, i.e. it will start from the same point
on the disc where the unit was stopped. If you
press STOP twice and the PLAY button, the disc
will start play from the beginning.
J SEARCH/SLOW (FWD): Allows you to
search forward through a disc while it is in play
mode. Each time you press this button, the
search speed changes as indicated by a number
of arrows on the right top of your screen.
After pressing the PAUSE button, each press of
this button will change the slow down speed as
indicated by a number of arrows in the right top
of the screen.
icon is
INFO
K DIMMER: Press to change the brightness
icon is selected).
of the front panel display or to turn the display
off completely in the following order: FULL
/ K / L ): Use to
BRIGHTNESS ➜ HALF BRIGHTNESS ➜ OFF ➜
FULL BRIGHTNESS
L PROGRESSIVE SCAN/INTERLACED:
Press this button to change the resolution of the
Component Video Output between standard
definition and progressive definition (PAL
interlaced and PAL progressive; NTSC interlaced
and NTSC progressive).
The setting can be changed only after quitting
the Setup menu.
Important Note:
Befor changing this setting read the notes for
this selection on page 19.
M ZOOM: When a DVD or VCD is playing,
press this button to zoom the picture so that it is
enlarged. There are 4 steps to the zoom
function, each progressively larger. Press through
each of the zoom stages to return to a normal
picture.
N PLAYLIST: Press this button to change the
playback order of the disc.
O RANDOM: Press for RANDOM playback in
random order.
P A-B: Press to select section A-B and to play
repeatedly.
Q V.OFF: Press to turn off video output for
improved performance from audio-only discs.
Press again to restore video output.
R LIGHT: Press to illuminate remote
controller.
S NUMERIC KEYS: Select numbers by
pressing these buttons.
T REPEAT: Each press of this button changes
the playback mode to repeat a chapter or track
or the entire disc. A repeat icon will appear in
the upper right corner of the screen indicating
the current repeat mode. If the Player
Information Screen is active, the changes will be
displayed on screen.
U CLEAR: Press to remove the Banner menu
from the screen.
In Stop mode and with all menus and banners
removed from the display, press and hold this
button for five seconds to reset all settings to
their factory defaults.
V IR EMITTER: This small, clear button-like
device sends the IR commands from the remote
control to the DVD 47. To ensure proper
performance of the remote control, be sure to
point it toward the unit and do not cover it with
your fingers when sending remote commands.
W HD Mode Selector: When the DVD 47 is
connected to a video display using the HDMI
Output , as soon as the player is turned on
(while the display is on already) the display
sends information to the DVD 47 indicating the
highest video resolution it is capable of han-
dling, and the DVD 47 automatically sets the
video output to match it. Pressing this button
allows you to manually change the output reso-
lution, with your selection indicated by the
Video Output Indicators O.
Changes made with this button remain active
until the DVD 47 is turned off. When the DVD 47
is turned off, and then on again, the DVD 47 will
revert to the default setting transmitted by the
display.
REMOTE CONTROL FUNCTIONS 9