Table of Contents
Advertisement
3. Disassembly and Reassemble
Description
4
Remove the Electric tapes shown on the
image.
•
EMI Point
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
where the tapes were first applied.
5
Remove the Power Cables and Speaker
Cables.
Remove the LVDS Cable, AC Inlet
connector and ASSY BOARD
P-FUNCTION ASSY Cable.
Remove the BT & WIFI Cable.
•
78" : BT module/WIFI module
Remove the LVDS Cable, Power Cable
and Local Dimming Cable.
3-2
: After removing release
Picture Description
: Filament Tape: Dressing Point
: Filament Tape: EMI Point
Power Cable
Speaker Cable
LVDS Cable
ASSY BOARD
P-FUNCTION ASSY Cable
NETWORK (BT & WIFI)
Local Dimming Cable
Power Cable
LVDS Cable
Power Cable
AC Inlet connector
Cable
Power Cable
Screws
Advertisement
Table of Contents
