Sony HKCA-700 Operation Manual page 32

Location and Function of Parts
!º Accessory attachment mounts
Used as necessary to attach accessories such as a BKP-
7911/7912 Script Holder or a focus/zoom demand.
For information on attaching accessories, refer to the
operation manual for the particular accessory to be
attached.
!¡ SCRIPT (script light) connector (4-pin)
Supplies power (12 V, 6 W maximum) for a script
light.
!™ RET CONT (return video control) connector (6-
pin)
This connector allows selection of return video
channel 1, 2, or 3, and turning on and off of the
intercom microphone, to be controlled externally.
!£ TRACKER connector (10-pin)
This connector is used for communications between
the camera operator and the tracker, and also for signal
transmission/reception for intercom channels 1 and 2.
It also may be used to output up tally and program
audio signals.
6(E)