Table of Contents
Advertisement
Trap Schedule
The trap schedule is used to control the operation of the trap: Here you can set a timer for the CO
of the fan and the counter For each 15-minute interval during a day, the on/off status can be selected for the following:
• CO
: green = on, white = off.
2
• Fan: blue = on, white = off.
• Counter: orange = on, white =off.
Edit the trap schedule:
17
To change the schedule, click on the pencil icon next to "Trap
Schedule" (16).
These fields can be set independently, although normally
they are all on at the same time. However, if for example a
catch bag is installed, and the catch is to be retained for coll-
ection, leave the fan on continuously.
Normally, the schedule is set to repeat daily; however, it can
also be set differently for every day of the week (17).
16
Clicking and dragging changes the status (click on the circle
with a question mark for a short demo (18)).
Click on "Save" to save the new schedule, or click on your
browser's back button to return to the previous page without
changing the schedule.
A new schedule is downloaded to the trap, and becomes
effective at the time of the next data connection (see Data
Connection in the "Trap Information").
release and the operation
2
18
EN
15
Advertisement
Table of Contents
