Download Print this page

Janssen Fritsen 1555539 Installation Manual

Climbing island

Advertisement

Quick Links

Montage handleiding – Installation manual
Verrolbaar sterraam
Climbing island
1555539

Advertisement

loading

Summary of Contents for Janssen Fritsen 1555539

  • Page 1 Montage handleiding – Installation manual Verrolbaar sterraam Climbing island 1555539...
  • Page 2 Montage handleiding – Installation manual Veiligheidsregels – Safety regulations WAARSCHUWING WARNING Ten einde het risico op letsel te verkleinen en nauwkeurig In order to reduce the risk of injury and to assure secure functioneren van het (turn)toestel te waarborgen, moeten functioning of the (gymnastic)apparatus, rules mentioned onderstaande voorschriften strikt in acht genomen worden: below are to be strictly followed:...
  • Page 3 Montage handleiding – Installation manual EBRUIKERS SERS Het opzetten en opbergen van het toestel mag alleen uitgevoerd worden door bevoegde volwassen personen die de inhoud van de hoofdstukken veiligheidsvoorschriften uit deze documentatie kennen en opvolgen. The mounting and storing of this device may only be executed by competent adult persons, who have read and understood the safety regulations of this manual.
  • Page 4 Montage handleiding – Installation manual Stap 1: Leg het hoofdframe op een verhoogd, vlak oppervlak om het onderstel van het sterraam te monteren. Lay the main frame on a flat, raised surface in order to attach the base of the climbing Island. Stap 2: Plaats het onderstel (2202700) op de 4 montage punten op de bodem van...
  • Page 5 Montage handleiding – Installation manual Stap 3: Gebruik voor de montage van de twee middelste staanders aan het onderstel, 3 zeskantbouten M8x20 met sluitringen (2x). Use 3 hexagon head bolts M8x20 with washer 8.4 to mount the two middle posts to the base. Stap 4: Schuif de montagebeugels (4171100) over de twee buitenste staanders en bevestig ze met...
  • Page 6 Montage handleiding – Installation manual Stap 5: Monteer de oprijdplaat (4171110) met de open zijde naar buiten. Bevestig met 2 inbusbouten M10x45. De oprijdplaat dient gemonteerd te worden onder de buitenste staander zonder montage gaten voor het scharnier. Mount the wheel storage strip (4171110) with the opening pointing outwards, using 2 hex.
  • Page 7 Montage handleiding – Installation manual Stap 7: Hang de vleugels in de scharnieren zoals op de foto. Hang the wings in the hinges as shown in the picture. Stap 8: Neem het overgebleven scharnier en monteer het, naar beneden wijzend, met button head kraag bouten M6x25, aan het hoofdframe.
  • Page 8 Montage handleiding – Installation manual Stap 9: Monteer de scharnier m.b.v. een nylon sluitring, carrosseriering en een button head schroef M10x20. Plaats eerst de nylon sluitring, leg daar de carrosseriering bovenop en sluit af met de button head schroef. Fasten the hinges using a nylon washer, large washer and button head screw M10x20.
  • Page 9 International E-mail: export@janssen-fritsen.com www.janssen-fritsen.com The Netherlands E-mail: verkoop@janssen-fritsen.nl www.janssen-fritsen.nl Belgium E-mail: info@janssen-fritsen.be www.janssen-fritsen.be...