Table of Contents
Advertisement
Date: Click on the calendar icon to set the system date.
Time: Click to set the system time.
Date Format: Choose from the dropdown menu to set preferred date format.
Time Format: Choose either the 24Hour or 12Hour time format.
Time Zone: Set the time zone you prefer to use (usually your local time zone).
NTP
NTP (Network Time Protocol) allows you to synchronize the date and time in the NVR automatically
using an Internet time server. To use this feature, the NVR must be connected to the Internet.
Check the NTP box, and select the NTP server from the drop down list.
DST
DST: Enable if Daylight Saving Time (DST) is observed in your local.
Time Offset: Select the amount of time to offset for DST (usually 1 hour).
Time Mode: Choose to set the daylight saving time in weeks or in days.
Start Time/End Time: Set the start time and end time for daylight saving time.
14
Advertisement
Table of Contents
