■ When the controller stand is attached on the left side
●
Run the controller cord to the left such as the right side of figure.
●
The product is shipped with the controller cord fastened to the right side.
①
Press
on the controller.
②
Press and hold
until a beep-beep-beep sound is heard.
ㅡ The legrest will rise until it reaches the
uppermost position.
③
Disconnect the controller cord.
ㅡ Hook is released by pressing on the tab on the fastening band with your fingers.
④
Move the controller cord under the legrest to the left side.
Fastening band
③
Tab
⑤
Fasten the controller cord.
ㅡ Press down from the edge if it does not fit in easily.
⑥
Insert the tip of the fastening band into the hole.
on the controller
②
Fasten to the right side
③
Controller cord
⑥
Legrest
④
View from front
Cord-holder groove
⑤
Controller cord
EN15