Table of Contents
Advertisement
Q&A
(Continued)
Question
Other
(Continued)
Is there a timer function?
What precautions should
I take to transport the unit
when moving?
EN48
Yes.
To prevent overuse, the massage automatically ends at a maximum of 19
minutes after starting. (Page EN39)
When the timer ends, the legrest automatically lowers and the massage heads
are stowed.
Press
to use again.
●
Take a break of around 10 minutes after using for 16 minutes.
●
Do not use more than 30 minutes per day.
Take the following precautions:
●
Recline the backrest and raise the massage heads to around the center of
the backrest. This moves the center of gravity to the center of the unit and
makes it easier to move.
●
Do not move the chair while a person is sitting in it.
①
Press
to turn on the power.
②
Press
to recline the backrest.
Hold down the two buttons until the limit beeps
sound.
③
Select one of the "auto course" with the
power "on".
The massage heads move. An error occurs and
the movement stops when they reach the center
of the backrest.
④
Press
to turn of f the power.
Pressing
automatically raises the backrest, so be sure to press
⑤
Turn the power switch "of f " and remove the power plug.
(Page EN41)
If you need to move the chair with the backrest upright, follow the steps below.
①
③
④
→
→
1. Follow steps
above and raise the massage heads to the center.
2. Press
on the controller again, raise the backrest, then press
●
Handle the chair with care. If you do not have the original box, use packing
materials to prevent damage or vibration.
●
When packing, check that the power cord and controller cord are not
wrapped around the main unit and take measures such as placing them on
the seat with the controller to ensure that they do not scrape against the
ground while moving.
Answer
Massage
heads
.
.
Advertisement
Chapters
Table of Contents
