Subscribe to Our Youtube Channel
Related Manuals for EMB Wallenstein GX600
Summary of Contents for EMB Wallenstein GX600
- Page 1 BACKHOES MODELS GX600 / GX700 / GX900 OPERATING INSTRUCTIONS AND PARTS MANUAL B072004 B072004 B072004 B072004 PRINTED IN CANADA...
-
Page 2: Warranty
There are no warranties, ex- pressed or implied other than those specified herein. For the nearest Authorized Service Centre call: EMB MFG INC. 4144 BOOMER LINE ST. CLEMENTS, ON N0B 2M0 PHONE: 519-699-9283 FAX 519-699-4146 www.embmfg.com email: sales@embmfg.com... - Page 3 CAUTION! A CAREFUL OPERATOR IS THE BEST OPERATOR Most accidents can be prevented by becoming familiar with all controls before operating the backhoe, keeping in mind the safety precautions stated below, and working safely. Read Operator’s Manual before operation. • Enter and exit operator’s platform from between stabilizers and tires •...
-
Page 4: Standard Features
(Safety Instructions continued) When attaching or detaching, always stand on the tractor side of • the stabilizer outside of rear wheel. Swing lock pin must be in cen- ter lock position before detaching backhoe from tractor. Before transport, attach SLOW MOVING VEHICLE sign and en- •... - Page 5 GX600 GX600 GX600 GX600 GX700 GX700 GX700 GX700 GX900 GX900 GX900 GX900 Product Specifications A Transport Height (with boom fully retracted) 61” 65” 84” Transport Width (with stabilizers up) 52” 54” 54” B Ground Clearance 8” 12” 12” C Transport Length 67”...
- Page 6 Starting Operation Back up tractor close to backhoe, then plug the two hoses from the backhoe into the tractor auxillery outlets. With the stabilizers, lift the backhoe to the right height (12” ground clearance. Raise tractor lift arms to correct height. Insert pins. Never attempt to raise three point hitch while backhoe is on tractor—...
- Page 7 Optional PTO Pump Kit (PTO70) DIAGRAM 3 PTO pump kit consists of PTO pump, reservoir assembly complete with filter, suction hose, and required fittings. 1. Install reservoir on backhoe frame. Reservoir slides on top of exist- ing frame. Holes may drilled in upper lip and bolted to ensure sta- bility.
- Page 8 Wallenstein Models GX600, GX700 & GX900 Backhoes GX600 GX700 GX900 Position Description Quan- Part Num- Part Num- Part Num- tity Bucket teeth 3 or 4 BKT40 BKT40 BKT40 buckets - 9" bucket BK690 BK900 BK900 - 12" bucket BK612 BK120 BK120 - 15"...
-
Page 9: Parts List Diagram
Parts List Diagram Replaceable Bushing Guide- All Models Position Pin Location Quantity Size Part Number 28 & 29 SWING CYLINDER PIVOT L & R 2 ea. Side 1"X 1 1/2" B13311 SWING CYLINDER SHAFT END 1" X 2" B13312 BOOM CYL. BUTT END 1"... - Page 10 Cylinder Parts List Position Description Quantity cylinder barrel changeable bushing cylinder rod changeable bushing cylinder gland wiper seal (order seal kit) U-cup seal (order seal kit) back-up seal (order seal kit) O-ring (order seal kit) bearing seal (order seal kit) U-cup seal (order seal kit) Piston+ shaft nut...
- Page 14 Locations of Grease Fittings Grease machine daily to ensure longevity of your backhoe.
- Page 15 CLOSED CENTRE PLUG INSTALLATION CLOSED CENTRE PLUG INSTALLATION CLOSED CENTRE PLUG INSTALLATION CLOSED CENTRE PLUG INSTALLATION THE CLOSED CENTRE PLUG IS FOR INSTALLATION IN THE BACKHOE VALVE ON UNITS WHICH WILL BE USED ON TRACTORS WITH A CLOSED CENTRE HYDRAULIC SYSTEM.
Need help?
Do you have a question about the Wallenstein GX600 and is the answer not in the manual?
Questions and answers