Interiart natural vision t-v link colour television (43 pages)
Summary of Contents for JVC AV-N48P55
Page 1
SERVICE MANUAL REAR PROJECTION TELEVISION YA166 2004 AV-N48P55 AV-N56P55 BASIC CHASSIS [AV-N56P55] TABLE OF CONTENTS PRECAUTION............... . . 1-3 SPECIFIC SERVICE INSTRUCTIONS .
Page 2
SPECIFICATION Items Contents AV-N48P55 AV-N56P55 Dimensions (W × H × D) 120cm × 124cm × 60.8cm 136.8cm × 138.6cm × 66.7cm (47-1/4" × 49" × 24") (53-7/8" × 54-5/8" × 26-3/8") Mass 82 kg ( 181 lbs ) 93.2 kg ( 205.7 lbs )
Page 3
SECTION 1 PRECAUTION SAFETY PRECAUTIONS (1) The design of this product contains special hardware, many (10) Isolation Check (Safety for Electrical Shock Hazard) circuits and components specially for safety purposes. For After re-assembling the product, always perform an isolation continued protection, no changes should be made to the original check on the exposed metal parts of the cabinet (antenna design unless authorized in writing by the manufacturer.
Page 4
INSTALLATION 1.2.1 INSTALLATION SITE (1) The rear of this set is provided with ventilation openings. Install the set more than 5 cm from a wall and in a location (more than 5cm) with good ventilation. (2) Avoid the following types of locations. a) Unstable locations (location must be able to withstand heavy weight).
Page 5
SECTION 2 SPECIFIC SERVICE INSTRUCTIONS FEATURES • Rear Projection HDTV. • 3-2 PULL DOWN : You can enjoy DVD movies at the highest picture quality. • MOTION COMPENSATION : With this function, the seamless reproduction of dynamic motion on the screen has been realized. •...
Page 6
REMOTE CONTROL UNIT [RM-C1257G] POWER key VCR / DVD switch TV / CATV switch MULTI SCREEN MULTI SCREEN operation keys TWIN INDEX C.C. DISPLAY key FREEZE SWAP INPUT SELECT SLEEP TIMER key SOUND key SOUND VIDEO STATUS key TUNE THEATER PRO key ASPECT LIGHT ASPECT key...
Page 7
TECHNICAL INFORMATION 2.3.1 MAIN MICRO COMPUTER (CPU) FUNCTION (MN102H75K) Pin No. Pin name Function Pin No. Pin name Function -------- -------- Lighting for on timer operating /MICON_V V.sync for OSD ON_TIM [LOW / ON:H] Low B protection detection LB_PRO SBO 0 Convergence control [RXD] [Protection:H] SBD 0...
Page 8
MAIN PARTS LOCATION 2.4.1 PWB ASS'Y ARRANGEMENT The PWB ASS'Y is indicated below. PWB ASS'Y name AV-N48P55H AV-N56P55H MAIN PWB ASS'Y SRP-1015A-M2 SRP-1010A-M2 ← MI-COM & DIST MODULE PWB ASS'Y SRP0D001A-M2 ← POWER PWB ASS'Y SRP-9010A-M2 ← DEF / CONVERGENCE OUT PWB ASS'Y SRP-2012A-M2 DIGITAL CONVERGENCE MODULE PWB ASS'Y SRP0K012A-M2...
Page 9
SCREEN HANDLING CAUTIONS 2.5.1 SCREEN STORAGE Store the SCREEN ASS'Y in a standing position in order to avoid deformation. If the screen is stored horizontally, there is risk of deforming the screen face. When necessary to place the SCREEN ASS'Y horizontally, position the screen side upwards and sure to place spacers between the screen and resting site (floor or stand etc.) to prevent the screen from sagging.
Page 10
SECTION 3 DISASSEMBLY 3.1 DISASSEMBLY PROCEDURE • Make sure that the power cord is pulled out from the AC wall socket. SPEAKER WIRE 3.1.1 SPEAKER GRILLE (1) Remove 4 screws [ A ] from rear side. (2) Open the door of the FRONT CONTROL BOX and remove 2 screws [ B ] from front side.
Page 11
• Take out the SPEAKER GRILLE. • Take out the FRONT CONTROL BOX. • Take out the SCREEN ASS'Y. (1) Remove 9 screws [ J ] attaching the mirror brackets of the MIRROR upper, left and right side. (2) Raise slightly to disengage of the mirror from the bottom bracket.
Page 12
3.1.11 MAIN UNIT • Take out the SPEAKER GRILLE. • Take out the FRONT PANEL. • Take out the REAR PANEL. FOCUS PACK (1) Remove 4 screws [ O ] from front side. SPEAKER (2) Take out the connector [BH], [R], [BG] on the FRONT MAIN UNIT WIRE CONTROL PWB.
Page 13
3.1.14 MAIN CHASSIS • Take out the REAR PANEL. (1) Remove 2 screws [ S ]. (2) Remove 2 screws [ P ]. (3) Pull out the MAIN CHASSIS for backside. MI-COM & DIST MODULE PWB NOTE: If necessary, remove the anode wires, connectors, respectively.
Page 14
MEMORY IC REPLACEMENT 3.2.1 MEMORY IC This memory IC stores data for proper operation of the video and SERVICE MENU deflection circuits. When replacing, be sure to use an IC containing this (initial value) data. 1.PICTURE/SOUND 7.CONVER B 2.YC SEP 8.IP 3.WHITE BALANCE 9.DSD...
Page 15
3.2.4 FACTORY SHIPPING SETTING USER SETTING Setting item Setting value Setting item Setting value POWER TINT / COLOR / PICTURE/ Refer to setting of Video status CHANNEL CABLE-02 BRIGHT / DETAIL memory at shipping factory VOLUME setting INPUT COLOR TEMPERATURE DIG.
Page 16
CHANNEL SETTING (CHANNEL SUMMARY) Band CH display Setting Band CH display Setting VHF LOW USED SUPER NOT USED NOT USED USED USED NOT USED USED NOT USED USED USED VHF HIGH USED USED NOT USED NOT USED USED NOT USED NOT USED NOT USED USED...
Page 17
REPLACEMENT OF CHIP COMPONENT 3.3.1 CAUTIONS (1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern. (3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it. 3.3.2 SOLDERING IRON (1) Use a high insulation soldering iron with a thin pointed end of it.
Page 18
SECTION 4 ADJUSTMENT ADJUSTMENT PREPARATION (1) You can make the necessary adjustments for this unit with SETTING POSITION either the Remote Control Unit or with the adjustment tools Setting item Setting position and parts as given below. VIDEO STATUS STANDARD (2) Adjustment with the Remote Control Unit is made on the TINT / COLOR / PICTURE / basis of the initial setting values, however, the new setting...
Page 19
ADJUSTMENT LOCATION REMOCON SENSOR PWB FRONT CONTROL PWB POWER SW POWER SW MENU CH - CH + VOL - VOL + INPUT-4 S-VIDEO VIDEO MAIN PWB R SPEAKER L SPEAKER FRONT FRONT CN1001 CN001 CN1002 CN002 CN1004 MI-COM & DIST MODULE PWB CN1003 CN003...
Page 20
B VM COIL VM PWB G VM COIL R VM COIL SCREEN MI-COM&DIST MODULE PWB CN000E FOCUS FOCUS PACK TP-B TP-G TP-R B CRT G CRT R CRT TP-EB TP-EG TP-ER SOCKET SOCKET SOCKET MI-COM&DIST MODULE PWB CN000Y FRONT FRONT DIGITAL CONVERGENCE CN007 CN007...
Page 21
BASIC OPERATION OF SERVICE MENU SERVICE MENU 1.PICTURE/SOUND 7.CONVER B 2.YC SEP 8.IP 3.WHITE BALANCE 9.DSD 4.MEMORY SETUP 0.HDMI 5.RF AFC 6.CONVER A DO NOT ADJUST 1.PICTURE/SOUND 5.RF AFC NTSC FULL ST L FL MUTE TOO HIGH GOOD TOO LOW TUNER MAIN FINE...
Page 22
4.5.1 TOOL OF SERVICE MENU OPERATION Operate the SERVICE MENU with the REMOTE CONTROL UNIT. 4.5.2 SERVICE MENU ITEMS In general, basic setting (adjustments) items or verifications are performed in the SERVICE MENU. 1.PICTURE / SOUND This sets the setting values of the VIDEO, AUDIO and DEFLECTION circuits. 2.YC SEP This is used when the YC SEPARATION circuit is adjusted.
Page 23
4.5.5 SERVICE MENU SETTING 1. PICTURE/SOUND 3. WHITE BALANCE AUDIO / VIDEO / DEFLECTION circuit adjustment. Adjustment of LOW LIGHT / HIGH LIGHT. 1. SETTING ITEM No. 1. SELECT ITEM • Press [CH+] / [CH-] key : AUDIO 2. SETTING VALUE : SIGNAL BRIGHT : DEFLECTION...
Page 24
6. CONVER A 8. IP Setting the CONVERGENCE PHASE adjustment. DIST circuit data setting. • Setting for 6.CONVER A is described in the CONVERGENCE [Do not adjust] adjustment. 8.IP 6.CONVER A SETTING ITEM No. CPA01~CPA11 NTSC FULL ST L FL MUTE CCA01~CCA12 SETTING ITEM No.
Page 25
Whenever you had not pressed the [MUTING] key, you would be able to recover the initial value by switching the [POWER] key. 4.6.1 [1. PICTURE / SOUND] AUDIO SYSTEM Initial setting value Item Item name Variable range AV-N48P55 AV-N56P55 A01 IN LEVEL 000~015 A02 LOW SEP 000~063 A03 HI SEP...
Page 26
DEFLECTION SYSTEM Item SINGLE PICTURE Item name Variable range TWIN / INDEX (FULL) D01 V. SIZE 000~127 D02 EW 000~063 D03 H. SIZE 000~063 D04 V. SCORE 000~063 D05 V. LINE 000~063 D06 V. CENT 000~063 D07 EW.TRAP 000~063 D08 BOT.CORN 000~015 D09 TOP.CORN 000~015...
Page 27
VIDEO SYSTEM ( NTSC / 480i ) NTSC 480i Item Item name Variable range STANDARD THEATER STANDARD THEATER 48" 56" 48" 56" 48" 56" 65" 48" 56" S01 COLOR 000~255 S02 TINT 000~255 ( 480p / 720p / 1080i ) 480p 720p / 1080i Item...
Page 28
( NTSC / 480i ) NTSC 480i STANDARD THEATER STANDARD THEATER Item Item name Variable range HIGH HIGH LOW HIGH HIGH LOW 48" 56" 48" 56" S10 DRIVE R 000~255 (Not display) -128 ~ +127 +004 +006 +014 +005 +006 +014 S12 DRIVE B 000~255...
Page 29
( NTSC / 480i / OTHERS SIGNAL ) NTSC 480i OTHERS SIGNAL Item Item name Variable range STANDARD THEATER STANDARD THEATER STANDARD THEATER S23 DC CTL 000~255 Item Item name Variable range Initial setting value S24 RGBLIMT 000~015 ( NTSC / 480i / OTHERS SIGNAL ) Item Item name Variable range...
Page 30
( TWIN / REGULER / THEATER / OTHERS ) MULTI SCREEN ASPECT VIDEO STATUS Item Item name Variable range OTHERS TWIN REGULAR THEATER S47 ACL EERG 000~255 Item Item name Variable range Initial setting value S48 CHRM GM 000~255 Item Item name Variable range Initial setting value S49 OSDR DC...
Page 31
OTHERS Initial setting value ASPECT Item Item Item name Variable range Item name Variable range 48" 56" CINEMA OTHERS F01 E 1 000~255 F09 AUTOSCR1 000~015 F02 E 2 000~255 F10 AUTOSCR2 000~015 (Not display) 000~255 F11 AUTOSCR3 000~015 F04 CATVMAX 000~255 F12 AUTOSCR4 000~015...
Page 32
4.6.2 [2.YC SEP] (All fixed) Variable Initial setting Item No. Item name NOTE : range value Initial setting value is reference value at following condition. YCM040 (Not display) 000~003 INPUT SIGNAL : NTSC YCM041 (Not display) 000~063 ASPECT : FULL YCM042 (Not display) 000 / 001...
Page 33
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value YCM085 (Not display) 000 / 001 YCM130 (Not display) 000~003 YCM086 (Not display) 000 / 001 YCM131 (Not display) 000~255 YCM087 (Not display) 000~063 YCM132 (Not display)
Page 34
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value YCM175 (Not display) 000 / 001 YCS033 (Not display) 000 / 001 YCM176 (Not display) 000 / 001 YCS034 (Not display) 000 / 001 YCM177 (Not display) 000~255...
Page 35
4.6.3 [3.WHITE BALANCE] Variable Initial setting Item No. Item name range value NOTE : Initial setting value is reference value at following condition. YCS078 (Not display) 000 / 001 INPUT SIGNAL : NTSC YCS079 (Not display) 000 / 001 ASPECT : FULL YCS080 (Not display)
Page 36
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value CBA37 CURSOL COL CDA01 DF DC -512~511 CBA38 CROSS COL CDA02 DF H1 -512~511 CBA39 SQUARE COL CDA03 DF H2 -512~511 CBA40 XCPOS VPOS 0~31 CDA04...
Page 37
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value CBA82 SQ7VSIZE 0~255 IPA024 (Not display) 000 / 001 CBA83 SQ7HSIZE 0~255 IPA025 (Not display) 000 / 001 CBA84 SQ8POSV 0~2047 IPA026 (Not display) 000~03F CBA85...
Page 38
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value DSA018 (Not display) 000~03F DSB001 (Not display) (Not display) DSA019 (Not display) 000 / 001 DSB002 (Not display) (Not display) DSA020 (Not display) 000~03F DSB003 (Not display) (Not display)
Page 39
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value DSB046 (Not display) (Not display) DSC036 (Not display) 000~0FF DSB047 (Not display) (Not display) DSC037 (Not display) 000~00F DSB048 (Not display) (Not display) DSC038 (Not display) 000~0FF...
Page 40
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value HDM009 (Not display) 000 / 001 HDM054 (Not display) 000 / 001 HDM010 (Not display) 000 / 001 HDM055 (Not display) 000 / 001 HDM011 (Not display) 000 / 001...
Page 41
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value RHD017 (Not display) (Not display) RHD062 (Not display) (Not display) RHD018 (Not display) (Not display) RHD063 (Not display) (Not display) RHD019 (Not display) (Not display) RHD064 (Not display) (Not display) RHD020...
Page 42
Variable Initial setting Variable Initial setting Item No. Item name Item No. Item name range value range value RHD107 (Not display) (Not display) RHD152 (Not display) (Not display) RHD108 (Not display) (Not display) RHD153 (Not display) (Not display) RHD109 (Not display) (Not display) RHD154 (Not display) (Not display) RHD110...
Page 43
ADJUSTMENT PROCEDURE 4.7.1 CHECK ITEMS Measuring Item Test point Adjustment part Description instrument X-RAY Resistor S1 connector (1) Receive NTSC whole black signal. PROTECTOR [6.8kΩ 2 pin : X-Ray2 (2) Connect resistor 6.8kΩ (1/4W, ±34Ω) between 2 pin check 1/4W ±34Ω] 3 pin : X-Ray1 &...
Page 44
4.7.3 FOCUS & BEAM SPOT ADJUSTMENT Measuring Item Test point Adjustment part Description instrument FOCUS & Signal TEST MODE (1) Receive NTSC crosshatch signal. BEAM SPOT generator [5.CONVER OFF] (2) Select FULL mode with [ASPECT] key. adjustment (3) Select DYNAMIC mode with [VIDEO STATUS] key. Similar R Def.
Page 45
4.7.4 DEFLECTION & CONVERGENCE ADJUSTMENT • The adjustment using the remote control unit is made on the basis of the initial setting values. • The setting values which adjust the screen to the optimum condition can be different from the initial setting values. •...
Page 46
4.7.4.2 PREPARATION Measuring Item Test point Adjustment part Description instrument SCREEN TILT Signal TEST MODE • Confirm correct FOCUS adjustment. (1) Receive NTSC crosshatch signal. adjustment generator [5.CONVER OFF] (2) Enter TEST MODE [5.CONVER OFF]. (3) Select crosshatch pattern with [INPUT] key. Remote G DEF.
Page 47
4.7.4.3 DEFLECTION ADJUSTMENT Measuring Item Test point Adjustment part Description instrument V. POSITION / Signal [1.PICTURE/SOUND] • To memorize every time after finish adjustment on each SIZE / generator D01 : V. SIZE mode. LINEARITY D05 : V. LINE (1) Receive NTSC circle pattern signal. adjustment Remote D06 : V.
Page 48
Measuring Item Test point Adjustment part Description instrument SIDE PIN Signal [1.PICTURE/SOUND] (1) Receive NTSC crosshatch signal. adjustment generator D02 : EW (2) Select FULL mode with [ASPECT] key. D08 : BOT.CORN (3) Select 1. PICTURE/SOUND from SERVICE MENU. Remote D09 : TOP.CORN (4) Select <...
Page 49
4.7.4.4 CONVERGENCE ADJUSTMENT Measuring Item Test point Adjustment part Description instrument CONVERGENCE Signal [6.CONVER A] NOTE: PHASE generator CPA04 : TPOV OFST Be sure to make it the value of Table-1. Supposing data [check] CPA05 : FINEP differs, correct to the value of Table-1. Remote CPA06 : STARTLIN A When data is corrected (when the [MUTING] key is...
Page 50
Measuring Item Test point Adjustment part Description instrument OVERALL Signal [ 6.CONVER A ] NOTE: CONVERGENCE generator CPA01 : FINE OFF Be sure to make it the value of Table-2. Supposing data (LINE) CCA01 : H CENT differs, correct to the value of Table-2. [check] Remote CCA02 : H SIZE...
Page 51
(reference color). (11) Press [OK] key to change the display colors to three colors from two colors (adjusting color + green) and AV-N48P55 make sure that the convergence has been aligned AV-N56P55 287 335 with each other.
Page 52
4.7.5 VIDEO ADJUSTMENT Measuring Item Test point Adjustment part Description instrument RGB CUTOFF Signal TP-R [1.PICTURE/SOUND] (1) Receive NTSC signal (include 0% or -3% black). adjustment generator [R CRT S14: CUTOF R (2) Select STANDARD mode with [VIDEO STATUS] SOCKET PWB] S16: CUTOF G key.
Page 53
Measuring Item Test point Adjustment part Description instrument WHITE Signal [3.WHITE BALANCE] NOTE : Before starting the adjustment, warm up the unit for BALANCE generator more than 30 minutes. (LOW LIGHT) CUT R (1) Receive NTSC gray scale signal (include 0% black). adjustment Remote CUT B...
Page 54
Measuring Item Test point Adjustment part Description instrument SUB BRIGHT Signal [1.PICTURE/SOUND] (1) Receive NTSC signal (include 0% or -2% black). adjustment generator S03: BRIGHT (2) Select STANDARD mode with [VIDEO STATUS] key. (3) Set the COLOR TEMP is LOW mode. Remote (4) Select 1.PICTURE/SOUND from SERVICE MENU.
Page 55
Measuring Item Test point Adjustment part Description instrument SUB COLOR / Signal TP-R [1.PICTURE/SOUND] [ Method of adjustment without measuring instrument ] SUB TINT / generator [R CRT S01 : COLOR (1) Receive NTSC color bar signal (include 75% white). B-Y GAIN SOCKET PWB] S02 : TINT...
Page 56
Measuring Item Test point Adjustment part Description instrument SUB COLOR / Signal TP-R [1.PICTURE/SOUND] [ Method of adjustment with measuring instrument ] SUB TINT / generator [R CRT S01 : COLOR (1) Receive NTSC color bar signal (include 75% white). B-Y GAIN SOCKET PWB] S02 : TINT...
Page 57
4.7.6 AUDIO (MTS) ADJUSTMENT Measuring Item Test point Adjustment part Description instrument MTS INPUT Remote [1.PICTURE/SOUND] (1) Select 1.PICTURE / SOUND from SERVICE MENU. LEVEL control unit A01 : IN LEVEL (2) Select < A01 > (IN LEVEL). check (3) Verify that < A01 > is set at its initial setting value. TV audio AUDIO OUT [1.PICTURE/SOUND]...
Page 58
SECTION 5 TROUBLESHOOTING SELF-DIAGNOSIS FUNCTIONS • This model has self-check functions that inform of the failure of the TV by detecting abnormality. • Operational state is always monitored and the identified is memorized on the record. Therefore, diagnosis may be prevented against expectations if "NG" are indicated in many items. When recurrence of symptoms can be predicted, erase (reset) the history of failure and allow the unit to again record the results of diagnosis.
Page 59
Indication Check item Details of detection Method of detection SYNC Presence or absence of Presence of synchronized signal. When entering the self-check mode, "OK" is synchronized signal HD : Component signal shown. M : NTSC main signal While running the mode with picture signal, if S : NTSC sub signal the synchronized signal is disappeared, "NG"...
Page 60
Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY VIDEO DISPLAY CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan (No.YA166) Printed in Japan...
Page 63
AV-N48P55 AV-N56P55 STANDARD CIRCUIT DIAGRAM NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY Type No indication : Ceramic capacitor The components identified by the symbol and shading are : Metalized mylar capacitor critical for safety. For continued safety replace safety ciritical : Polypropylene capacitor components only with manufactures recommended parts.
BLOCK DIAGRAM R CRT SOCKET PWB SPEAKER (L) MI-COM & DIST MODULE PWB TU1101 IC1101 DECODE VTV1 U/V TUNER R OUT IC1001 AUDIO SPEAKER (R) AD Y CONTROL IC1002 AD PR DRAM AD PB IC1140 MTSDECODE CONVERTER /AUDIO SELECT /AUDIO CONTROL IC1003 CENTER SEP.
Page 70
OPEN C2341 R2341 OPEN OPEN COMY5 HDMI_Y MAIN PWB ASS'Y (5/9) HDMI_YG NOT USED HDMI_PB LC2341 R2342 HDMI_PBG D2401 OPEN OPEN SRP-1015A-M2: AV-N48P55/H OPEN HDMI_PR HDMI_PRG SRP-1016A-M2: AV-N56P55/H R2343 OPEN C2342 R2344 OPEN OPEN COMPB5 D2403 OPEN LC2342 R2345 OPEN...
Page 71
IC1211- 7 IC1211- 13 IC1211- 21 IC1211- 22 (10µs) FRONT CONTROL PWB SHEET 17 CN101G QGA2501C1-10 MAIN PWB ASS'Y (6/9) SHEET 7 X_RAY_M SRP-1015A-M2: AV-N48P55/H CN100G SHEET 7, 8, 9 STB_3.3V OPEN STB_3.3V R1718 4.7k R1717 BASS_MU OPEN SRP-1016A-M2: AV-N56P55/H...
Page 72
QGA2501C5-03Z MODE MODE DC (V) DC (V) PIN NO. PIN NO. NOT USED CN1004 MAIN PWB ASS'Y (7/9) SHEET 1, 6, 8, 9 SHEET 6 SRP-1015A-M2: AV-N48P55/H NECK CN1003 QGB1506L1-16 SCL0 SCL0 SRP-1016A-M2: AV-N56P55/H SDA0 C1442 R1421 SDA0 R1423 3.3k 34.2...
POWER PWB CIRCUIT DIAGRAM SHEET 16 MAIN PWB(7/9) DEF / CONVERGENCE OUT PWB(1/2) SHEET 7 SHEET 14 CN003 MODE CN008 DC (V) PIN NO. QGB1506M1-16 OPEN QGB1506L1-16 CN90E1 IC921 NOT USED 141.2 D811 D812 PC811 OPEN OPEN GND1 51.6 T811 LF802 OPEN QQR1407-001...
CAUTION : POWER PWB PATTERN FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH SAME TYPE AND RATED FUSE(S) AND ROHM'S MFR'S TYPE CP(S). C993 C955 D952 R933 D961 Q956 C998 D956 Q951 Q955 R903 R953 CN008 Y922 CN007 R951 D953 Y921 C997...
CHANNEL CHART (US) CHANNEL CHART (CA) MODE CHANNEL MODE CHANNEL MODE CHANNEL MODE CHANNEL TUNER TUNER TUNER TUNER BAND BAND BAND BAND BAND BAND BAND BAND CATV REAL DISP. CATV REAL DISP. CATV REAL DISP. CATV REAL DISP. W+35 W+35 W+36 W+36 W+37...
Page 92
Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY VIDEO DISPLAY CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan (No.YA166) Printed in Japan...
Page 93
PARTS LIST CAUTION The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the safety. The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied. P.W.
Page 94
USING P.W. BOARD & REMOTE CONTROL UNIT ....................3-2 EXPLODED VIEW PARTS LIST ..........................3-3 EXPLODED VIEW ............................... 3-4 PRINTED WIRING BOARD PARTS LIST [AV-N48P55/H] ..................3-6 MAIN P.W. BOARD ASS'Y (SRP-1015A-M2) ....................3-6 DEF / CONVERGENCE OUT P.W. BOARD ASS'Y (SRP-2012A-M2) ............3-10 R CRT SOCKET P.W.
PRINTED WIRING BOARD PARTS LIST [AV-N48P55 MAIN P.W. BOARD ASS'Y (SRP-1015A-M2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D1596 MA8100/M/-X Z DIODE D1667 MA111-X SI DIODE IC1101 L7805CP D1668 MA111-X SI DIODE...
Page 99
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C1216 NCF11CZ-475X C CAPACITOR 4.7uF 16V Z C1677 QETN1EM-108Z E CAPACITOR 1000uF 25V M C1218 NCB21CK-105X C CAPACITOR 1uF 16V K C1678 QETN1EM-108Z E CAPACITOR 1000uF 25V M C1219 NCF11CZ-475X...
Page 100
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C3038 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z R1218 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J C3039 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z R1219 NRSA63J-331X MG RESISTOR 330Ω...
Page 101
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R1665 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J R3005 NRSA63J-181X MG RESISTOR 180Ω 1/16W J R1666 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W J R3006 NRSA63J-152X MG RESISTOR 1.5kΩ...
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local L1951 QQL26AK-470Z CHOKE COIL 47uH K Q808 2SD601A/QR/-X TRANSISTOR L1952 QQL26AK-470Z CHOKE COIL 47uH K Q809 2SD601A/QR/-X TRANSISTOR L1983 QRN143J-0R0X C RESISTOR 0Ω 1/4W J Q810 2SD601A/QR/-X TRANSISTOR...
Page 103
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C181 NCB31CK-104X C CAPACITOR 0.1uF 16V K R112 NRSA63D-182X MG RESISTOR 1.8kΩ 1/16W D C182 NCB31CK-104X C CAPACITOR 0.1uF 16V K R113 NRSA63D-123X MG RESISTOR 12kΩ...
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R512 QRL029J-331 OMF RESISTOR 330Ω 2W J CN00Y WJK0170-001A E-SI C WIRE C-B R521 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J CN011 QGB2501J1-15 CONNECTOR B-B (1-15) R522 NRSA63J-103X MG RESISTOR...
VM P.W. BOARD ASS'Y (SRP-7201A-M2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C2004 QETN2EM-106Z E CAPACITOR 10uF 250V M C2005 QFZ9027-472 MM CAPACITOR 4700pF 1000V K Q7101 2SC1906-T TRANSISTOR C2010 QETN1CM-107Z E CAPACITOR 100uF 16V M Q7102...
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local Q950 UN221C-X DIGI TRANSISTOR R918 QRE121J-102Y C RESISTOR 1kΩ 1/2W J Q952 UN221C-X DIGI TRANSISTOR R920 QRE121J-684Y C RESISTOR 680kΩ 1/2W J Q953 2SC3928A/QR/-X TRANSISTOR R922 QRE121J-101Y...
Ref No. Part No. Part Name Description Local C0444 QETN1HM-106Z E CAPACITOR 10uF 50V M C0445 QETN1HM-106Z E CAPACITOR 10uF 50V M C0446 QFLC1HJ-103Z M CAPACITOR 0.01uF 50V J C0710 QETN1VM-476Z E CAPACITOR 47uF 35V M C0711 QETN1CM-336Z E CAPACITOR 33uF 16V M C0712 NCB31CK-104X...
PRINTED WIRING BOARD PARTS LIST [AV-N56P55 MAIN P.W. BOARD ASS'Y (SRP-1016A-M2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D1596 MA8100/M/-X Z DIODE D1667 MA111-X SI DIODE IC1101 L7805CP D1668 MA111-X SI DIODE IC1140 CXA2205Q-X D1669...
Page 109
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C1216 NCF11CZ-475X C CAPACITOR 4.7uF 16V Z C1677 QETN1EM-108Z E CAPACITOR 1000uF 25V M C1218 NCB21CK-105X C CAPACITOR 1uF 16V K C1678 QETN1EM-108Z E CAPACITOR 1000uF 25V M C1219 NCF11CZ-475X...
Page 110
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C3038 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z R1218 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J C3039 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z R1219 NRSA63J-331X MG RESISTOR 330Ω...
Page 111
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R1665 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J R3005 NRSA63J-181X MG RESISTOR 180Ω 1/16W J R1666 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W J R3006 NRSA63J-152X MG RESISTOR 1.5kΩ...
R CRT SOCKET P.W. BOARD ASS'Y (SRP-3101A-M2) Ref No. Part No. Part Name Description Local REFER TO PARTS LIST IN PAGE 3-12 FOR THIS P.W. BOARD. L1951 QQL26AK-470Z CHOKE COIL 47uH K L1952 QQL26AK-470Z CHOKE COIL 47uH K L1983 QRN143J-0R0X C RESISTOR 0Ω...