Introduction; Viewing The Backup Camera; Pairing A Bc 50 Camera With A Garmin Navigation Device - Garmin BC 50 Owner's Manual

See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
This device is intended to enhance your situational awareness when used properly. If used improperly, you
could become distracted by the display, which could lead to an accident causing serious personal injury or
death. Only access the information displayed on the device with a glance. Always maintain awareness of your
surroundings and do not stare at the display or become distracted by the display. Focusing on the display could
prevent you from avoiding obstacles or hazards.
After you pair your camera with a compatible Garmin
when you turn on your navigation device, and you can manually enable the camera view at any time.
• If your camera is connected to a reverse lamp (recommended), place the vehicle into reverse.
• If your camera is connected to constant power, select
• To show or hide the camera view using voice commands, say Show Video or Hide Video.
NOTE: Voice commands are not available on all navigation devices. The voice commands may vary based on
your navigation device model. This feature is not available for all languages or may require additional
navigation device setup for some languages. For more information, see the Voice Command app or the Voice
Control app on your navigation device, or the navigation device owner's manual.
The camera view appears. When you place the vehicle into drive, the camera automatically stops sending video,
and the navigation device returns to normal operation. The camera video is dismissed automatically after 2
minutes and 30 seconds, whether or not your vehicle has moved forward.
Switching Cameras
You can cycle through the video feeds from all paired cameras.
From the camera view, select
The video feed from the next camera appears, and the camera name appears at the top of the screen.

Pairing a BC 50 Camera with a Garmin Navigation Device

You can pair the BC 50 camera with a compatible Garmin navigation device. Go to
information about device compatibility.
1 Update your navigation device to the latest software.
Your device may not support the BC 50 camera without the latest software. For more information about
updating the device software, see the owner's manual for your navigation device.
NOTE: The location of the camera app may vary by device model. See your navigation device owner's manual
for more information.
2 Select an option:
• Select Settings > Wireless Camera > Add New Camera > BC 50
• From the apps menu, select Tools > Wireless Camera >
3 Follow the on-screen instructions to finish pairing and setting up the camera.
4 Select or Save.
After you complete the pairing process with a camera for the first time, it connects automatically to the Garmin
navigation device when power is applied.

Introduction

Introduction
WARNING

Viewing the Backup Camera

WARNING
® navigation device, the camera view appears automatically
.
/ .
garmin.com/BC50
> BC 50.
for more
1