Accessories - Kenwood CS-1044 Instruction Manual

STANDARD ACCESSORIES INCLUDED
Probe (PC-30)
Attenuation
Input Impedance
1/10
1/1
Instruction Manual
Replacement Fuse
C S - 1 0 4 4 :
0.8 A
0.5 A
C S - 1 0 2 5 :
0.5 A
0.3 A
OPTIONAL ACCESSORIES
Probe Pouch (MC-78)

ACCESSORIES

Y 8 7 - 2 2 6 0 - 0 0
1/10, 1/1
10 MQ, 22pF ± 1 0 %
1 Mfi, 2 0 0 p F o r l e s s
B 5 0 - 7 5 8 3 - 3 0
F 0 5 - 8 0 1 5 - 0 5
F 0 5 - 5 0 1 3 - 0 5
F 0 5 - 5 0 1 3 - 0 5
F 0 5 - 3 0 1 1 - 0 5
Y 8 7 - 1 6 0 0 - 0 0
Fig. 2 9
MOUNTING THE PROBE POUCH (MC-78)
This soft vinyl pouch attaches t o the right side of the
oscilloscope housing and provides storage space for t w o
probes and the operators manual. Install the probe pouch
as follows:
1. Unsnap the probe pouch from the retainer plate.
2. Align the retainer plate w i t h the 4 holes on the right side
of the case, w i t h the 3 snaps at the top.
3. Attach the four corners of the retainer plate t o the
oscilloscope case w i t h the four nylon rivets supplied.
4. Attach the probe pouch t o the retainer plate using the
snap fastener.
Plunger
nylon rivet
' Grommet
Washer
• Retainer Plate
27