Advertisement
Analog outputs:
SYNC outputs:
Video amplifier:
Composite sync:
Comp sync polarity:
Input power:
Power consumption:
Physical:
Federal Communications Commission Statement
This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. This equipment has been designed
to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC rules. Harmful interference
when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause
interference, in which case the user, at their own expense, will be required to take whatever measures are necessary
to correct the interference.
Warranty
HRT warrants that the supplied equipment is free from defective workmanship and material. Subject to the
agreements set forth, will repair or replace, at its option, the defective components for a period of 2 years
after purchase. The following conditions apply to the Warranty:
•
Warranty void if item subject to improper use, negligence, or unauthorized modification
•
Instructions must be followed in obtaining RMA number as explained below
•
Any defective part should be returned, insured and freight prepaid, to Hall Research, with the following:
Return Material Authorization Number (RMA#)
Description of failure, as detailed as possible
Shipping address and contact name and phone number
Hall Technologies
2010
Input impedance: 2 k ohm, voltage level: 0 - 5 v max, TTL
2 independent channels, 3 BNC's each
Output impedance: 75 ohm, short circuit protected, level: 1 vp-p nominal with termination
2 TTL line driver BNC outputs per channel
Level: TTL compatible
Greater than 300 Megahertz bandwidth, DC coupled
TTL on the HOR output, or sync-on-green depending on switch position
Negative
6vDC grounded adapter supplied (range 6 ~ 9 VDC). OR +5v DC grounded regulated power
supply on Molex connector.
1.2 watts maximum
8.88 x 3.13 x 1.35 inch (excluding connectors & mounting bracket) - weight: 1.2 lb
3
5
Page
of
Advertisement
