Using The Scoring Blade - KEENCUT Excalibur 3S User Manual

Excalibur 3S user guide

3.2 Using the scoring blade

CAUTION ALWAYS USE HAND AND EYE PROTECTION WHEN SNAPPING PLASTIC
NOTE : The scoring blade is designed to score acrylics, Plexiglas and other similar rigid plastics. Trials should be carried out
on scrap materials first to ensure you obtain the required standard of cut.
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
The world's finest cutting machines
sales@keencut.co.uk (UK HQ)
sales@keencut.com (US sales)
Page 14 of 27
Select the scoring blade position on the turret and clamp the
material in the machine.
Turn the ratchet hold-off knob to disengage the ratchet.
Clamp the plastic to be scored in the machine, position and
depress the cutting head so the blade touches the plastic at the
top. Apply thumb pressure to the cutter and draw the blade
down the material in one continuous motion
click here to view this document online >
Scan the QR code or