Disposal Of Waste Electrical And Electronic Equipment - Estyma IGNEO touch Installer Manual

malfunctions or software errors.
 This device has no replaceable parts. All servicing and repair, apart from cleaning and circuit breaker replacement
(electrical grid disconnected) and changing settings must be performed by an authorized profesionals.
 Before any service activity disconnect the device from any power sources.

Do not use gasoline, solvents or other chemicals for cleaning. It can damage the panel. Use soft cloth instead.
 If the power cord is damaged, do not use the device. Damaged cable must be replaced with one with the
same parameters by the service department.
 Settings must be adjusted to a type of boiler and fuel, accomodating for all other conditions. Incorrect
settings can result in failure. In extreme cases it can lead to life threatenig situations.
 The regulator is ment to be installed by a boiler producer. Before using it in a device, the producer must
verify that it's compatible with the boiler type, and its use will not cause any danger or malfunctions.
1.1 D
ISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
This electronic device consists of partly recycleable materials. It has to be disposed of by taking it to a designated
used electric and electronic equipment collection point or a retailer. It should not be mixed with general household
waste.
www.estyma.pl
EGM-ENG-I 20171123
Chapter 1. Safety
5