Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Binks 104099
Summary of Contents for Binks 104099
- Page 1 Instruction Manual 104099 Auto Changeover Panel...
-
Page 2: Eu Declaration Of Conformity
Note: Read and follow all instructions and safety precautions before using this equipment Product Description 104099 – Auto Changeover Panel for Ram Units This equipment is designed for control and use with all Binks Ram Units. Manufacturer: - Finishing Brands UK Ltd, Ringwood Road, Bournemouth, BH11 9LH. -
Page 3: Specification
Instruction Manual Specification Part Number 104099 Max. Air Pressure Inlet 7 Bar Compressed Air Inlet 1/4” BSP (female) Pilot Hose Connections 4mm Push In Dirt 40 microns Air Quality ISO 8573-1 Class 5/5/4 Water +7ºC@7bar 25mg/m³ Total Weight of Unit 2.7 Kg / 6 lbs... - Page 4 Therefore, it is recommended to read these instructions carefully before start-up. Binks PCE cannot be held responsible for damage or malfunctions resulting from the non-observance of the operating instructions. These instructions, including regulations and technical drawings, may not be copied, distributed, used for commercial purposes or given to others either in full or in part without the consent of Binks PCE.
- Page 5 Instruction Manual WARNING READ THE MANUAL PROP 65 WARNING Before operating equipment, read WARNING: This product contains and understand all safety, operation chemicals known to the State of and maintenance information California to cause cancer and birth provided in the operation manual. defects or other reproductive harm.
- Page 6 Instruction Manual DRUM EMPTY DRUM EMPTY SIGNAL: RAM 1 SIGNAL: RAM 2 HORN EXHAUST 1/4” BSP AIR INLET PUMP START PUMP START RAM 1 RAM 2 RAM 1 RESET HORN MUTE RAM 2 RESET Page 6 of 12 77-3240-R1.0...
-
Page 7: Mounting Detail
Instruction Manual MOUNTING DETAIL Page 7 of 12 77-3240-R1.0... -
Page 8: Starting The System
Instruction Manual AUTO CHANGEOVER PANEL OPERATION INSTRUCTIONS Starting the system 1. With both ram units set up and correctly hosed to the auto changeover panel (see page 10), carry out the following. 2. Turn on the compressed air to the panel. 3. - Page 9 Instruction Manual AUTO CHANGEOVER PANEL OPERATION INSTRUCTIONS Operation of a ‘set up’ system 1. When the PUMP 1 ram hits the drum empty trip valve the pump will stop, and PUMP 2 will automatically start. The panel will also operate an alarm. 2.
- Page 10 Instruction Manual Page 10 of 12 77-3240-R1.0...
- Page 11 Instruction Manual Page 11 of 12 77-3240-R1.0...
- Page 12 Instruction Manual Page 12 of 12 77-3240-R1.0...
Need help?
Do you have a question about the 104099 and is the answer not in the manual?
Questions and answers