Advertisement
MCSMRC REMOTE CONTROLLER
INSTALLATION AND OPERATION INSTRUCTION
SAFETY INFORMATION AND GENERAL GUIDE
READ AND SAVE THESE INSTRUCTIONS
• Please read and understand this entire manual before attempting to assemble, install or operate
the product.
• Make sure that all electrical connections comply with local codes, ordinances, the National
Electrical Code and ANSI/NFPA 70. Hire a qualified electrician or consult a do-it-yourself wiring
handbook if you are unfamiliar with installing electrical wiring.
Warning: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in
order to avoid electrical shock.
Note: Fan installation must be complete including assembly of blades before testing the
remote controller.
Note: Refer to your Ceiling fan instruction manual for Safety and installation instruction.
Warning: This remote controller is for use on ceiling fans and fan lights only.
Warning: Do not exceed maximum rating of the remote controller. Install the wall mount
cradle away from excess heat or humidity
Customer Service
800-969-3347
Customer Service Center
7400 Linder Ave.
Skokie, IL 60077
www.montecarlofans.com
Advertisement
Table of Contents
Related Manuals for Monte Carlo Fan Company MCSMRC
Summary of Contents for Monte Carlo Fan Company MCSMRC
- Page 1 MCSMRC REMOTE CONTROLLER INSTALLATION AND OPERATION INSTRUCTION SAFETY INFORMATION AND GENERAL GUIDE READ AND SAVE THESE INSTRUCTIONS • Please read and understand this entire manual before attempting to assemble, install or operate the product. • Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70.
- Page 2 Warning Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. Use AC 120V/60HZ power supply only.
- Page 3 Remote Controller Operation Remove the battery cover from the remote control transmitter and install batteries. Replace the cover. This remote uses 2 1.5V/AAA batteries. Note: If not using for long periods of time, remove the batteries to prevent damage to DIM (D) remote controller, and store the remote controller away from excess heat or humidity.
- Page 4 Install Transmitter wall mount cradle with 2 screws provided. Useful tips: The remote transmitter can be removed by pressing it upward from the lower half. The remote transmitter can be held on magnetic metal materials by a magnet built in the transmitter. Wall mount cradle User Tips 1.
- Page 5 Fan operation with Bond Home APP Download the Bond Home app with your smart devices. The app is available on the Google Play Store and Apple Store. Or get it from bond home link, http://bondhome.io/app Create a new account following on-screen operating steps. Make the fan (Smart by Bond wi-fi...
- Page 6 Jul.2021 Nov.2021 update about Bond App...
Need help?
Do you have a question about the MCSMRC and is the answer not in the manual?
Questions and answers