Subscribe to Our Youtube Channel
Related Manuals for Lenoxx PR4350
Summary of Contents for Lenoxx PR4350
- Page 1 Model no: BT9350 Batch no: PR4350 PLEASE READ AND RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
- Page 2 Product Introduction Get right into the groove with our LED Stage Lights Bluetooth Speaker, featuring flashing LEDs in the dual woofers and rotational stage lights. This Bluetooth system will be sure to put on quite a disco show in your very own lounge room. Each woofer is 15.4cm in circumference and puts out 40 watts, ready to gear your next party.
- Page 3 • If the power cord is damaged, do not use the equipment. The cord must be replaced by the manufacturer or similarly qualified personnel to avoid a hazard. Contact the after-sales support line for advice. CAUTION: To reduce the risk of fire or electric shock, do not expose this equipment, the cord or plug to rain or moisture;...
- Page 4 Getting Started Before First Use • The unit may become hot during operation. Always leave sufficient space around the unit for ventilation. • The voltage supplied to the unit should match the voltage that is printed on the back panel. If you have any doubts concerning this matter, consult an electrician.
-
Page 5: Front Panel
CONTROLS: FRONT PANEL: 1. Volume adjustment knob: turn this knob located on the top of the speaker to increase or decrease the volume. 2. Previous button: Press to play the previous music track. For use with the FM radio. Press this button to go to the previous position of scanned in radio station. -
Page 6: Rear Panel
REAR PANEL: 1. External battery 15V-22V Input: There is the option to connect an external battery to the rear of the unit through the black and red spring clips located on the rear panel of the speaker. The battery is not included. The wires for connection are not included. The battery required is 15V –... -
Page 7: Remote Control
REMOTE CONTROL 1. Mute: Press to mute sound. Press again to unmute sound 2. Standby: Press to put the speaker into standby mode. Press again to take it off standby mode. 3. Numerical buttons: When the FM radio stations have been scanned in to the speaker, press the numerical buttons to go to a saved radio station position. - Page 8 13. Light flash: Press to change the light mode for the stage light. Press repeatedly to change between blinking, scrolling or off. 14. MD: Press to repeatedly change the scrolling mode of the stage light. 15. M.V – and M. V+: Microphone volume adjustment. Press M.V – to decrease microphone volume, press M.V+ to increase microphone volume.
-
Page 9: Troubleshooting
TF card: Add a memory card to the TF card slot on the speaker. The speaker will detect that a memory card has been added and will begin music playback from it. The speaker will only playback MP3 music files on the card. It can not read MP4 music files. USB (2A) PORT This speaker has the capability to re-charge a device (e.g.: smart phone, MP3 player) through this port.
Need help?
Do you have a question about the PR4350 and is the answer not in the manual?
Questions and answers