Installation
2
Install the new travel module
2.1 Install the new travel module by aligning
all 4 tabs with the holes on the motor
bracket and snapping the new travel
module into place.
2.2 Align the opening of the travel module
with the hole in the motor shaft and
replace the retainer clip (A).
2.3 Reconnect the wire harness (B) to the
travel module.
2.4 Reassemble the garage door opener.
2.5 Reconnect electrical power to the garage
door opener.
2.6 Proceed to Adjustments.
Tab
Tab
2
A
Retainer
Clip
B
Wire Harness