Download Print this page

Sealey AP22 Series Manual page 2

6 drawer topchest & rollcab combination with ball-bearing slides

Advertisement

4.1.
Remove the bolts, nuts and washers from the base of the rollcab (fig.1), and then lift off the body to uncover the topchest.
4.2.
Remove the screws from the base (fig.2), and separate from the topchest, discard the screws.
Note:
Place protective material onto the ground to avoid damaging the back of the topchest.
4.3.
Turn the rollcab upside down and place the base into position as shown in fig.3A.
Note:
Place protective material onto the ground to avoid damaging the top of the rollcab.
4.4.
Position the corner brackets (fig.3B) and secure using bolts, washers and nuts.
4.5.
Attach the back panel to the base using two bolts, washers and nuts.
4.6.
Ensure the base is square in the rollcab and tighten all nuts fully (fig.3C).
4.7.
Place the rollcab upright and place the topchest on top as shown in fig.4.
fig.4
5. OPERATION
5.1.
To lock the top chest, close all drawers, then insert one lock bar into the back slot inside the top compartment.
Close the lid and lock with the key (fig.5).
6. MAINTENANCE
.
6.1.
Periodically lubricate the drawer slides (fig.4).
6.2.
Clean the surfaces with a soft cloth and a mild water/detergent solution.
6.3.
Check all fixings and tighten if required.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.5
01284 703534
sales@sealey.co.uk
Original Language Version
fig.3
www.sealey.co.uk
AP22 Series Issue:1 10/01/22

Advertisement

loading

This manual is also suitable for:

Ap22hvgAp22bkAp22oAp22yAp22b5054630142529 ... Show all