Table of Contents
Advertisement
Installing the Switch Chassis
Step 2
Install the chassis into the rack.
a) Use two M4 screws to attach the brackets to the rack.
1
Front-mounting position
Grounding the Chassis
The switch chassis is automatically grounded when you properly install the switch in a grounded rack with
metal-to-metal connections between the switch and rack.
You can also ground the chassis, which is required if the rack is not grounded, by attaching a customer-supplied
grounding cable. Attach the cable to the chassis grounding pad and the facility ground.
Warning
Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available.
Warning
Statement 1046 Installing or Replacing the Unit
To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be
made first and disconnected last.
2
M4 screws (2 each side)
Cisco Nexus 9348GC-FXP-B1 ACI-Mode Hardware Installation Guide
Grounding the Chassis
25
Advertisement
Table of Contents
