Philips Signage Solutions BDL9870EU User Manual page 31

Table of Contents

Advertisement

BDL9870EU
1. Press [OK] or [ ] button to enter the submenu.
Schedule
Today
2014 . 11 . 04
1
2
On
:
_ _
3
4
5
6
WED
7
SAT
2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7),
and then press [OK] button to mark it the item number.
Schedule
Today
2014 . 11 . 04
1
1
2
On
:
_ _
3
4
5
6
WED
7
SAT
3. Press [ ] or [ ] button to select the schedule:
P ower-on schedule: Press [ ] or [ ] button to set the hour
1
and minute for the display to turn on.
Power-off schedule: Press [ ] or [ ] button to set the hour
2
and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute slot if
you do not want to use this power-on or power-off schedule.
Input-source selection: Press [ ] or [ ] button to select an
3
input source. If no input source is selected, the input source
will remain the same as last selected.
Date schedule: Press [ ] button to select which day in a
4
week this schedule item will be take effect, and then press the
[OK] button.
When Input-source select to USB, enable to access USB play
5
list setting:
Photo
Options
- Press [ ] [ ] buttons to choose files.
- Press [ ] [ ] buttons to switch Playlist and File Manager.
TUE
20 : 19 : 55
Input
Off
:
_ _
_
MON
TUE
THU
FRI
SUN
Every week
USB play list
TUE
20 : 19 : 55
2
3
Off
Input
:
_ _
_
4
MON
TUE
THU
FRI
SUN
Every week
5
USB play list
0001/0002
Photo
Video
Exit
- Press [OK] button to set or clear the playlist.
- To save the playlist, press [
Photo
Movie.avi
Photo1.jpg
Sort
Photo2.jpg
Media Type
Photo3.jpg
Recursive Parser
Save list
Options
4. For additional schedule settings, press [
above. A check mark in the box next to the number of the schedule
item indicates that the selected schedule is in effect.
NOTES:
• If the schedules overlap, the scheduled power-on time takes priority
over scheduled power-off time.
• If there are two schedule items programmed for the same time, the
highest numbered schedule takes priority. For example, if schedule
items #1 and #2 both set the display to power on at 7:00 AM and
off at 5:00 PM, then only schedule item # 1 will take effect.
• Each Playlist supports up to 30 files.
• Playlist will not be cleared after {Factory settings}. You have to
manually remove the files or delete usb_schedulinglist.txt in the
USB.
DDC/CI
Choose to turn on or off the DDC/CI communication function. Select
{On} for normal use.
DDC/CI (Command Interface) specifies a means for a computer to
send commands to the monitor, as well as receive sensor data from the
monitor, over the bidirectional link such as DDC2Ab/Bi/B+.
Specific commands to control monitors are defined in a separate
Monitor Control Command Set (MCCS) standard.
DDC/CI monitors are sometimes supplied with an external color
sensor to allow automatic calibration of the monitor's color balance.
Some tilting DDC/CI monitors support an auto pivot function, where
a rotation sensor in the monitor enables the operating system to keep
the display upright as the monitor is moved between its portrait and
landscape positions.
The following DDC/CI commands should be supported via command
line:
No.
Commands
1
Set Brightness
2
set Contrast
3
Set Red Gain
4
Set Green Gain
5
Set Blue Gain
22
] and choose Save list.
\media\photo
[..]
Photo
], then repeat the steps
No.
Commands
6
Get Brightness
7
Get Contrast
8
Get Red Gain
9
Get Green Gain
10
Get Blue
0004/0004
Exit

Advertisement

Table of Contents
loading

Table of Contents