Bosch SHE89PW55N/11 Operating Instructions Manual page 12

en-us Getting Started
Switching on the appliance
for the first time
When the dishwasher is switched on
for the first time, you are taken
directly to the settings for switching
on the appliance for the first time.
The following text is indicated on the
display window at the top @:
Scroll with < >
Set with + -
Leave with Setup 3 sec.
The required settings for switching on
the appliance for the first time are
listed in the table below.
Settings
Switching on the
appliance for the first
time
Language
Time format
Time setting
Water hardness
Rinse aid dispenser
Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
settings.
Change the setting as follows:
Open the door.
1.
Switch on On/Off switch (.
2.
Press Info button 8 for
3.
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )* until
4.
the required setting is displayed.
12
Factory setting
American English
24h
12:00
°E0-8 Soft
Level 5
Change the setting as follows:
Keep pressing button > )* until
1.
the required setting is displayed.
Make the selection with setting
2.
buttons + - X.
Press and hold the Info button
3.
8 for 3 seconds.
The selected setting has now been
stored.
Infotext
by pressing Info button
Language selection.
12h or 24h.
Set the current time.
Setting water hardness. When using Multitabs,
select the lowest setting.
Amount of rinse aid affects drying. When using
Multitabs, select setting 0.
Make the selection with setting
5.
buttons + - X.
Press and hold the Info button
6.
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
When you reset your
Note:
dishwasher to the factory settings,
you are taken directly to the settings
for switching on the dishwasher for
the first time.