Sony XAV-AX4000 Help Manual page 13

Help Guide
In-Car Receiver
XAV-AX4000
Using Apple CarPlay Wirelessly
When using Apple CarPlay for the first time, device registration (called "pairing") is required. Pairing enables this unit and
your iPhone to recognize each other.
Note
Make sure the GPS antenna (aerial) (supplied) is connected.
Place your iPhone within 1 m (3 ft) of this unit.
1
Press HOME, then touch [Settings].
2
If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings].
Hint
You can touch [Devices] to open the [Device Connection] screen alternatively.
Touch [Device Connection].
3
Touch [+Add New Device].
4
Operate your iPhone according to its message on the [Add New Device] screen.
5
When setting the BLUETOOTH setting, Wi-Fi setting, and Apple CarPlay of your iPhone to [ON], select "XAV-
AX4000" on the setting screen of your iPhone and then proceed to the pairing steps.
[Pairing Request] appears on the unit.
6
Confirm the [Passkey:].
The same 6-digit passkey appears on your iPhone and the unit.
Touch [Pair], then touch [Apple CarPlay].
7
Note
The unit can only be connected with one iPhone device at a time.
To disconnect the BLUETOOTH connection, turn the connection off from either the unit or your iPhone.
While using Apple CarPlay, BLUETOOTH connection is not possible. BLUETOOTH pairing is possible.
13