Sanyo FW50C36F Owner's Manual page 32

Preferences
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
fun-Link (HDMI CEC) allows you to operate your connected HDMI-CEC
device.
Setting your location to home
Choosing Home gives you full flexibility to change predefined settings
for picture and sound.
1
Use H I to select Preferences, then press OK.
2
Use H I to select Location, then press OK.
Language Location
Preferences fun-Link (HDMI CEC)
Restore default settings TV placement
E-sticker
3
Use H I to select Home, then press OK.
The unit will be set up with predefined settings for
Retail retail displays. In this setting, you can set the
backlight brighter.
The unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice
Home
of picture and sound quality selections according to
your preference.
Note(s)
You must set Home in the menu. Otherwise, personalized picture and sound settings will
●
not be memorized after the unit goes into standby mode.
TV placement
To apply the best settings for your TV, select wall mount or stand
mount.
1
Use H I to select Preferences, then press OK.
2
Use H I to select TV placement, then press OK.
3
Use H I to select Wall mounted or On a TV stand, then press
OK.
E-sticker
When you set Location to Retail, E-sticker (Electronic Sticker) is
displayed. E-sticker can be turned off using procedure below.
1
Use H I to select Preferences, then press OK.
2
Use H I to select E-sticker, then press OK.
3
Use H I to select Off, then press OK.
Use fun-Link
Your TV supports fun-Link, which enables one-touch play and one-touch
standby between fun-Link-compliant devices. Compliant devices must
be connected via an HDMI connector.
One-touch play
When you connect your TV to devices that support one-touch play, you
can control your TV and the devices with one remote control. For
example, when you press K (Play) on your DVD remote control, your TV
automatically switches to the correct channel to show the DVD content.
One-touch standby
When you connect your TV to devices that support standby, you can use
your TV remote control to put your TV and all connected HDMI devices
in standby mode. You can perform one-touch standby using the remote
Retail
control from any of the connected HDMI devices.
Home
System audio control
When you connect your TV to HDMI CEC compliant devices, your TV
can switch automatically to play audio from the connected device. To use
one-touch audio, you must map the audio input from the connected
device to your TV. You can use the remote control from the connected
device to adjust the volume.
Device control
Device control allows you to control fun-Link-compliant devices using
your TV remote control.
HDMI-ARC (Audio Return Channel) (HDMI 1 only)
HDMI-ARC allows you to use fun-Link to output TV audio directly to a
connected audio device, without the need for an additional digital audio
cable. Be sure that the device is HDMI CEC and ARC compliant, and that
the TV is connected to the device using an HDMI cable attached to both
HDMI-ARC connectors.
SANYO does not guarantee 100% interoperability with all HDMI CEC devices.
●
The fun-Link-compliant device must be switched on and selected as the source.
●
fun-Link (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a fun-Link feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand fun-Link devices
and be sure its fun-Link (HDMI CEC) setting is also set to on.
1
2
3
Location
fun-Link (HDMI CEC)
TV placement
E-sticker
Note(s)
Use H I to select Preferences, then press OK.
Use H I to select fun-Link (HDMI CEC), then press OK.
Use H I J K to select the item you want to adjust, then press OK.
fun-Link control
Auto TV On
Device control
HDMI-ARC
32 .
English
Off
On
Continued on next page.