Passenger Grips (Rst1Ntf / Rst1Ntfy); Passenger Grip Warmer Switch - Yamaha RS Venture RST9NJ Owner's Manual

Control functions
RST1NTF / RST1NTFY
1. V-belt holder
RST9N
1. V-belt holder
ECS00181
NOTICE
Make sure that the V-belt is installed se-
curely in the holders.
ESU13303
Passenger grips (RST1NTF /
RST1NTFY)
The passenger grips can be installed in three
different positions to suit the passenger's
preference.
28
1
1. Passenger grip
2. Passenger grip adjusting knob
To change the passenger grip posi-
tion
1. Remove the passenger grip adjusting
knob by turning it counterclockwise.
2. Move the passenger grip to the desired
position.
3. Install the adjusting knob by turning it
clockwise.
EWS00781
WARNING
Make sure that the passenger grip adjust-
ing knobs are securely tightened after
changing the positions of the passenger
grips.
ESU10682

Passenger grip warmer switch

The passenger grip warmer switch controls
the electrically heated passenger grips.
1
2