Page 1
VR2100 VR2100-R3 IFS Fiber Module Installation & Operation Instructions P/N 1062818 • REV B • ISS 01JUL11...
Page 2
From VT1101M, VT1001AC Simplex multimode or VT1001 fiber optic cables series module VR2100 DUAL VIDEO RECEIVER OPTICAL INPUT 1 VIDEO OUTPUT 1 International Fiber AGC / VIDEO Systems OPTICAL INPUT 2 AGC LEVEL 2 Incorporated Coax cable AGC / VIDEO...
Page 3
VR2100 LED changes from A AGC/Video red to green LED changes from AGC/Video red to green C Power LED illuminates...
Page 4
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc.
Page 5
Note: Be ready at the equipment before calling. Online Another great resource for assistance with your Interlogix product is our online publication library. To access the library, go to our website at the following location: http://www.interlogix.com/transmission Many Interlogix documents are provided as PDFs (portable document format). To read these documents, you will...
Page 6
Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws.
Need help?
Do you have a question about the VR2100 and is the answer not in the manual?
Questions and answers