Fine Tune; Skip; Exchange; Image Control - Haier L26A9A Owner's Manual

TV PROGRAM SETTING

FINE TUNE

When you can not get a satisfactory picture effect,
you can fine tune to obtain.
1. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
2. Press CH+/- button to select MANUAL
SEARCH, press VOL+/- button to enter the next
menu.
3. Press CH+/- button to select FINE TUNE.
4. Press VOL+/- button to start fine tune until you
obtain the best picture and sound, then loose
the button, press MENU button to exit.

SKIP

1. Select the program number you need skip.
2. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
3. Press CH+/- button to select the MANUAL
SEARCH, press VOL+/- button to enter the
next menu.
4. Press CH+/- button to select SKIP, press
VOL+/- button to select ON.
5. Press MENU button to shut off the menu.
When you use CH+/- button to select channel,
this channel number will be skipped. But you
can still use one direct-digit choosing button to
select the skipped channel number.
Note: How to recover the skipped channel number
1. Press direct-digit choosing button to select the
channel number that needs recover.
2. Repeat the steps above.
3. Press CH+/- button to select SKIP, press VOL+/-
button to select OFF.
SOURCE
CURRENT CHANNEL
SKIP
TARGET CHANNEL

EXCHANGE

AFC
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
SOURCE
CURRENT CHANNEL
SKIP
TARGET CHANNEL
EXCHANGE
AFC
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
SOURCE
CURRENT CHANNEL
SKIP
TARGET CHANNEL
EXCHANGE
AFC
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
12
CURRENT CHANNEL
SKIP
10
TARGET CHANNEL
OFF
EXCHANGE
10
AFC
FINE TUNE
OFF
SEARCH NEXT
MOVE
PICTURE MODE
CONTRAST
10
BRIGHTNESS
OFF
SATURATION
10
TINT
SHARPNESS
OFF

NOISE REDUCE

SIZE MODE
MOVE
10
OFF PICTURE MODE
10 CONTRAST
BRIGHTNESS
OFF
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
MOVE
TV PROGRAM SETTING
EXCHANGE
1. Press MENU and CH+/- button to select SOURCE
menu and VOL+/- to enter.
SOURCE
2. Press CH+/- button to select MANUAL
15
SEARCH, press VOL+/- button to enter the next
OFF
menu.
28
3. Press CH+/- button to select TARGET CHANNEL,
OFF
press VOL+/- button to select the channel you need
exchange.
471.2MHZ
4. Press CH+/- button to select EXCHANGE, press
VOL+/- button to exchange, as figure, exchange
SELECT MENU EXIT
the current channel number 15 to channel number
28.
5. Press MENU button to save and exit.

IMAGE CONTROL

SET YOUR FAVOURITE PICTURE MODE

SET YOUR FAVOURITE PICTURE MODE
1. Press MENU and CH+/- button to select PICTURE
menu and VOL+/- to enter.
PICTURE
2. Press CH+/- button to select the item that needs
PERSONAL
adjust.
3. Press VOL+/- button to adjust the selected item,
the detailed adjustment is as following table.
The table of picture item adjustment effect
STRONG
FULL Items
SELECT MENU EXIT
Contrast
Brightness
Saturation
Tint
*
Sharpness
PICTURE
Note: TINT is only valid in NTSC system.
PERSONAL
NOISE REDUCE
Noise reduce can decrease the noise of picture
1. Press MENU and CH+/- button to select PICTURE
STRONG
menu and VOL+/- to enter.
FULL
2. Press CH+/- button to select the NOISE REDUCE.
3. Press VOL+/- button to select OFF, WEAK or
SELECT MENU EXIT
STRONG as your require.
13
VOL- VOL+
Strong
Weak
Bright
Dark
Light
Thick
Green
Red
Soft Sharp