Table of Contents
Advertisement
3-1
Removing Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the rear system cover:
1.
Remove the screw securing the top cover.
2.
Push the plastic handle.
3.
Pull the grip handle to open the panel cover.
4.
Slide the cover to the front of the system and then remove the cover in the direction indicated by the
arrow.
5.
Remove the screws securing the middle cover.
6.
Lift the middle cover to the back of the system and then remove the cover in the direction indicated
by the arrow.
7.
To reinstall the chassis cover reverse steps 1-6.
System Hardware Installation
2
3
4
5
6
- 24 -
1
5
5
5
Advertisement
Table of Contents
