Advertisement
Contents
Connections
Connecting devices with remote control connectors
The following functions can be used when this unit is connected to a Marantz amplifier.
The remote control signal received with the amplifier is transmitted to
0
this unit in order to control this unit.
When the power of this unit is turned on, the power of the amplifier turns
0
on, and the input source for the amplifier switches to "CD". (Power on
link function)
0 You can set the power on link function to on or off in "Power On Link" in the
settings menu. (v p. 36)
0 Some operations may not be possible on some Marantz amplifiers.
Connection
Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT
connector of the amplifier.
Setting
Turn the EXTERNAL/INTERNAL switch on the unit to "EXTERNAL".
This setting will disable remote sensor reception of this unit.
0
To operate the unit, point the remote control at the remote sensor of the
0
amplifier.
0 To use this unit by itself without connecting an amplifier, turn the switch to
"INTERNAL".
Front panel
Display
Playback
Settings
18
Rear panel
Tips
This unit
Remote
connector
Signal flow
cable
(supplied)
Amplifier
COAXIAL
COAXIAL
OPTICAL
OPTICAL
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
5V/1A
5V/1A
ANTENNA
ANTENNA
NETWORK
NETWORK
HDMI ARC
HDMI ARC
DIGITAL AUDIO IN
DIGITAL AUDIO IN
PHONO
PHONO
SIGNAL GND
SIGNAL GND
AUDIO IN
AUDIO IN
CD
CD
LINE
LINE
RECORDER
RECORDER
RECORDER
RECORDER
SUBWOOFER
SUBWOOFER
IN
IN
OUT
OUT
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT PRE OUT
PRE OUT
POWER AMP IN
POWER AMP IN
REMOTE CONTROL
REMOTE CONTROL
Remote
Index
Appendix
Set to
"EXTERNAL".
SPEAKERS
SPEAKERS
Advertisement
