Providing power to the SS-530/SS-531
IMPORTANT
Do not allow the total consumption current of the
current sensors connected with the PS-54 Power
Supply to exceed the rated output current of the
PS-54.
The consumption current of the SS-530/SS-531
depends on current under measurement. One unit
of the PS-54 can simultaneously provide power to
up to two current probes (the SS-530/SS-531) each
of which measures a current with the maximum
rated current value. For information about the
consumption current, see "Consumption current"
(p. 8 1) in "Typical Characteristics."
The PS-52 Power Supply, which does not have sufficient
current capacity, cannot activate the SS-530/SS-531.
Preparing for Measurement
2
29