Unpacking And Removing Shipping Material - LG T1789EFHKD Owner's Manual

10 INSTALLATION
Unpacking and Removing
Shipping Material
Unpack all shipping materials from the washer for
proper operation and inspect it for shipping damage.
CAUTION
• Failure to remove shipping materials can cause
excessive noise and vibration.
1
Lift the washer off the foam base.
After removing the carton and shipping material,
lift the washer off the foam base. Make sure the
plastic tub support comes off with the base and is
not stuck to the bottom of the washer.
If you must lay the washer down to remove the
base packaging materials, always protect the side
of the washer and lay it carefully on its side. Do
not lay the washer on its front or back.
Plastic tub support
2
To prevent damage, do not remove the foam
block containing the owner's manual, parts, and
laundry product samples from the washer tub until
the washer is in the final location.
NOTE
• Once removed, save the foam block for future use.
If the washer needs to be moved, the foam block
will help prevent damage during transportation.
3
Unfasten the power cord from the back of the
washer.
Carton base