Introduction; Controls - Haier HL32K Owner's Manual

Controls

This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.
Front panel controls
HL26K, HL32K, HL37K, HL42K, HL47K
HDMI3 IN HDMI3 IN
HL37T,HL52T
HDMI3 IN HDMI3 IN
1.MENU: Menu display.
2.INPUT: Press to open the input source mode. In the MENU/INPUT screen, these buttons serve as OK
button.
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down
either +/- . In the MENU screen, these buttons serve as up/down buttons.
5.POWER: Press to turn on and off the TV.
6.AV2 AUDIO IN: Connect the audio L/R cables from the video signal source to these jacks.
7.AV2 VIDEO IN: Connects the composite video cable from an external signal source to this jack.
8.HDMI3 IN: Connect a signal from an external device to HDMI.
9.Headphone jack : Headphone audio output terminal.
10.Remote Sensor
6 TV LCD-TFT
VIDEO2 IN VIDEO2 IN
VIDEO VIDEO
L - AUDIO - R L - AUDIO - R
VIDEO2 IN VIDEO2 IN
VIDEO VIDEO
L - AUDIO - R L - AUDIO - R
Receivers Irsignals from the remote control.
Do not put anything near the sensor ,as its function may be affected.

Introduction