Troubleshooting - OM SYSTEM LS-P5 User Manual

Troubleshooting

Problem
The display is blank.
Unable to operate the
voice recorder
Unable to record
7
Playback is inaudible.
The recording is too
quiet.
EN
150
Possible cause
The batteries are not inserted
properly.
The remaining battery power
is low.
The power is OFF.
The remaining battery power
is low.
The power is OFF.
The voice recorder is in HOLD
mode.
There is no remaining memory.
The maximum number of
recordable files has been
reached.
The earphones are connected
to the earphone jack.
The recorder is connected to an
audio device via Bluetooth
[Off] has been selected for
[Speaker].
The volume is set to [00].
A low recording level has been
set.
The output level of the
connected external device may
be too low.
The recording level hasn't been
adjusted.
Solution
Check that the positive and negative
terminals of the batteries are placed
correctly (☞ P.12).
Replace or charge the batteries
(☞ P.12, P.16).
Turn the power ON (☞ P.26).
Replace or charge the batteries
(☞ P.12, P.16).
Turn the power ON (☞ P.26).
Release HOLD mode (☞ P.27).
Erase unneeded files (☞ P.74).
Select another folder (☞ P.33).
To output the playback through the built-
in speaker, disconnect the earphones.
To play audio over the built-in speaker,
end the Bluetooth
.
®
(☞ P.141).
To output the playback through the built-
in speaker, select [On] for [Speaker]
(☞ P.99).
Adjust the volume (☞ P.58).
Redo recording after setting the
recording level to [High] or [Middle]
(☞ P.84).
Adjust the output level of the external
device.
Redo recording after adjusting the
recording level (☞ P.84).
connection
®