Table of Contents
Advertisement
Choosing a Recording Method [Fn Rec]
NOTE
• Assigning a recording function to the
F2 button using [Fn Rec] selects
[Off] for [Slate Tone].
• Selecting [Pre-Recording], [V-Sync.
Rec], or [VCVA] for [Fn Rec] selects
[Off] for [Voice Detect] > [While
Recording] (☞ P.105).
• Selecting [Pre-Recording] or [Over
Dubbing] for [Fn Rec] selects [Off]
4
for [Rec Scene] (☞ P.47).
TIP
• The following is required for using
the [Over Dubbing] function.
• Select a file recorded in the
[PCM 44.1kHz/16bit] or [PCM
44.1kHz mono] (.wav) format for
overdubbing (☞ P.33, P.58).
• Set [PCM 44.1kHz/16bit] or [PCM
44.1kHz mono] for [Rec Mode]
beforehand (☞ P.85).
EN
122
Advertisement
Table of Contents
