Installing The Unit; Removing The Unit - NORAUTO NS-218 DBT Manual And Security Instructions

Installing and removing the unit

Installing the unit

1
1
2
Before attaching, make
sure the direction of the
escutcheon is correct.
(Wider hooks on the
bottom side.)
Control panel

Removing the unit

1 Detach the control panel.
2 Engage the catch pin on the removal tools into the holes on both
sides of the escutcheon, then pull it out.
3 Insert the disassembly tools deeply into the slots on each side,
then follow the arrows instructions as shown on the right.
3
2
Sleeve
Trim plate
Control panel
3
4
Bend the appropriate
tabs to hold the sleeve
firmly in place.
1
2
Screw (not included in
this packing)
Sleeve
Trim plate
5 3
m m
Dashboard
91
EN