Olymp GOsafe H20 Series Operating Instructions Manual page 11

Reading the closing and opening log
• This program can be used to query 100 data records.
• Leave the door open.
• Press "CLEAR" twice.
• Enter "162550" and "LOCK".
• The display will show "RECORD."
• The program for retrieving records when closing and opening begins.
The records are displayed in two screens.
The function keys look as follows:
• Press "2" to return to the previous record.
• Press "8" to jump to the next record.
• Press "4" to show the previous content on the display.
• Press "6" to show the following contents on the display.
• Press "5" to go to the last record.
• Press "CLEAR" to exit this program.
For example:
Safe opened with master code on July 30, 2015 at 16:01:30.
The display shows the following message:
year
1 5
Press "6" to display the following content.
hour
1 6
• "1": Opening the lock with the user code.
• "2": Opening the lock with the master code.
• "3": Opening the lock with the CEU.
• "4": Opening the lock with the emergency key.
• Press "CLEAR" to exit this program.
CEU
Hand Device (CEU) for open the door, Set the code or Download the last 100 times opening records.
Alarm - Incorrect code
Incorrect code entry 3 times activates the self-locking function. (3-6 digit code only)
The keypad is locked for 5 minutes!
month
0 7
minute
0 1
date
3 0
- Open way
- 2
10