Network Settings - Toshiba FlashAir III Quick Start Manual

8

Network settings

Network settings
When
Network settings
This window allows you to change the SSID and password. Enter a
new network name in the
field, and then click
Password
❖
SSID
The input field for the SSID.
The SSID is the network name that identifies a device for
wireless LAN communications.
The SSID can be up to thirty two (32) alphanumeric
characters.
❖
Password
The input field for the password used to connect to FlashAir III
wireless SD™ Memory Card.
The password should have eight (8) to sixty three (63)
characters.
Be sure to use a secure password that is not easy to guess.
Toshiba recommends you make a note of your SSID and
password.
❖
Use the same network settings, even after the card is
formatted
This option is available for FlashAir III W-02.
is selected, the following window appears.
field and a new password in the
SSID
.
Apply