What To Do If Your Stove Does Not Operate As Indicated - IKL GULIVER TERMO User Manual

The chimney stove must operate exclusively with the ash drawer inserted. The solid residue
of the combustion (ashes) must be collected in a hermetic container, resistant to fire. The
stove must never be ignited when there are gas or steam emissions (e.g. glue, gasoline,
etc.). Never deposit flammable materials near the stove. During the combustion there will be
thermal energy spread which warms up the surfaces, the door, the fireplace glass, the handles
and knobs, the smoke pipe and the front side of the stove. Please avoid the contact with
these parts without gloves or the relevant tools.

12. WHAT TO DO IF YOUR STOVE DOES NOT OPERATE AS INDICATED

12.1 Difficulties during operation
– Check whether the chimney entrance is made adequately.
– Check whether the chimney dimensions are correct and suitable for the
device.
– Check the thermic insulation of the chimney and if it is made
according to standard.
– The hearth door must be closed properly,
– Check if the draft is in the allowed limitations.
12.2 Ignition difficulties
– Open the primary air and smoke control.
– Use dry wood.
– Ventilate the room fto obtain sufficient quantity of oxygen.
– The chimney must be adapted to the device for which it is used.
12.3 Smoke coming out
– Check if the primary air control is opened.
– Check whether there is leaking on the chimney entrance.
– Check if there are any obstacles from ashes and other remains.
– Check the airflow.
– Check the draft in the chimney.
– Check the screws.
12.4 Glass getting dirty
– Wet wood: use dry wood (with max 20 % humidity)
– Wrong fuel (see allowed materials)
– Too much fuel in the hearth or the wood touches the glass
– Insufficient air flow (see connecting the chimney)