BELL+HOWELL TRIBURST Active Dlue SNR 5500L Instructions

Brand: BELL  HOWELL
E & MISHAN & SONS INC
230 Fifth Ave, Suite 800 NY 10001,USA
Instructions-
Warning: In order to make the lamps installed correctly, when unpacking the case, please read
this manual in detail, and properly keep !
Name:TRIBURST Active Dlue SNR 5500L
Model: 8169
Specification: 120V~ 60Hz,60W, IP20, E26
Product Description：TRIBURST Active Dlue SNR 5500L with Lighting Equipment
MADE IN CHINA
INSTALLATION - No tools required.
Turn the power OFF using the light switch for that socket before installing the lamp
Remove the protective cap.
Screw the counterclockwise if the light socket is facing downward (ceiling).
Screw it in clockwise if light socket is facing outward (wall) or upward. DO NOT
OVERTIGHTEN.
Turn the Tri Burst ON/OFF using the light switch for that socket.
Adjust the LED panels to the desired
position.
Panels move up/down.

IMPORTANT SAFEGUARDS:

• Due to intensity LED bulbs, do not stare directly into the LED light.
• Risk of electric shock.
• This product is intended for dry location
• Use in open luminaire only.
• Do not use with dimmers.
• For indoor use only.
• Added weight of the device may cause instability of a free standing portable Luminaire
• this device is not intended for use with emergency exits
• This product has radar sensor function
• When this product senses a moving object, it will automatically light up.
• When no moving object is sensed for more than 30 seconds, it will automatically go out.
• There are mechanical buttons on the surface of this product, which can be used to