Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: K-VS1000-07-01-SL / K-VS1000-07-02
Part Description: GPS Bar – KAWASAKI VERSYS1000 2015-2018
Applicable to Stainless Steel & Steel Version
Installation / Parts List / Bill of Material for Mounting
No. Description
1
Bracket RH
2
End Adaptor
3
GPS Bar
4
Washer M8
5
Screw M8 x 16
6
Bracket LH
SRC Design uses Metric System of Measurement and all dimensions are in Millimeters
* Recommended to use the Torque specified in the table
** Denotes Usage of Liquid Thread Locker in specified locations
Copyright By SRC
Design and Specification are subjected to change
Quantity Torque * (N-m)
1
2
1
2
2
9 - 10
1
Remarks **
Use Liquid Thread Locker
Page 1
Advertisement
Related Manuals for SRC K-VS1000-07-01-SL
Summary of Contents for SRC K-VS1000-07-01-SL
- Page 1 9 - 10 Use Liquid Thread Locker Bracket LH SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
-
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2... -
Page 3: Mounting Instructions
Mounting Instructions Step 1: First step, while mounting the SRC-GPS Bar is to remove the Wind-Shield screen, as shown. The 2 sets of Screws/Washers and Nuts from each side has to be removed and to be used for mounting the brackets of the GPS Bar. - Page 4 16 (5) – 1 off from either sides, through the hole in the Brackets and secure the threads to the End Adaptor and tighten them to torque as per specifications in the BOM table. Copyright By SRC Design and Specification are subjected to change Page 4...
- Page 5 GPS Bar in Final Mounted condition is as shown above. Copyright By SRC Design and Specification are subjected to change Page 5...
-
Page 6: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.