Replacing A Cf Card - HP MSR 2000 Preparing For Installation

Figure 48 Removing slide rails

Replacing a CF card

CAUTION:
Execute the umount cfb0: command before you remove the CF card if the router is powered on.
To replace a CF card:
Press down the spring clip of the CF card cover and open the cover.
1.
Press the CF card eject button of the CF card reader so that the eject button projects from the panel.
2.
Press the eject button again to eject the CF card part-way out of the CF card reader, and then pull
3.
the CF card out of the CF card reader.
Keep the removed CF card for future use.
Install a new CF card. For the installation procedure, see "Installing the router."
4.
If you do not install a new CF card, close the CF card cover.
viii