Table of Contents
Advertisement
11.Points for attention in product operation
11.1when using this product, follow the instructions exactly.
11.2 for the product heat dissipation space, a 5CM space is reserved around the product to allow heat
dissipation convection.
11.3 when the power supply of the product is insufficient, the load power exceeds the rated power or
the ambient temperature is too high, the product will automatically start the protection function and turn
off the output.
11.4 power charging, it is recommended to charge without load.
11.5 leaving the power off for a long period of time can cause the power supply itself to run out of power.
Ensure that it is recharged every 6 months.
11.6 with AC load, the power provided by this product is rated load power, generally less than this
power ac load can be normal use, but some power equipment startup power is often more than rated
power, such as motor equipment start-up instantaneous power is generally rated power several times.
Moreover like the energy-saving lamp starting power about its rated power dozens of times, if their
starting power is greater than the peak power of our products, will start our products over-protection
function, automatically turn off the output.
11.7 the use of this product in the environment of inflammable, explosive and corrosive gases such as
gasoline and gas is prohibited.
11.8 water or other foreign substances into the product, to ensure the safety of product use,
send to the distribution department for testing and treatment, due to abnormal use, the company will be
based on the actual situation charges.
12.Simple trouble shooting of product
12.1 power on without AC output, check whether the power display screen is displayed, if not, try to
charge the product for 1-2 minutes, activate the product.
12.2 check if there is a problem with the use of digital products and connectors when the machine is
switched on without DC output.
13.Warning for use of product
13.1 do not put products in water!
13.2 do not heat the product or place it near a fire source!
13.3 please do not disassemble or transform the product without permission!
13.4 don't slam the product!
9
please
Advertisement
Table of Contents
