Connect To The Tactacam App - Tactacam SOLO XTREME Instruction Manual

CONNECT TO THE TACTACAM CONNECT APP
Wi-Fi
Note: Your camera functions can only be controlled by your phone when your are
connected to Wi-Fi. This setting lets you connect your camera to the Tactacam
Connect app for mobile remote connection. When wireless is on, a blue LED appear
by the wireless status icon just in front of the rec/power button. The blue wireless
LED will blink when not connected for 1 min then power itself off. Once connected
the blue LED will go solid. The Wi-Fi will remain on throughout the lifetime of the
battery.
1. Downloading the Tactacam Connect app:
Download and open the Tactacam Connect app from your app store on your phone
or tablet. Follow the app's on-screen instructions.
2. Connect to your Tactacam
To turn on your Tactacam Wi-Fi: While your Tactacam is in pause mode push and
hold the Mode Button for 3 seconds. (Tactacam Solo Xtreme hold the Rec/Power
Button for 3 seconds.) You will see the blue LED indicator light turn on and start
blinking.
3. From your mobile device's Wi-Fi setting select the Tactacam Wi-Fi network. (There
is no default password for your Tactacam Wi-Fi.) When connected, the blinking blue
LED light will become solid blue.
4. Open the Tactacam Connect app and connect your Tactacam.
12