Reformatting Your Sd Card - Tactacam SOLO XTREME Instruction Manual

REFORMATTING YOUR SD CARD

Always use the recommended SD card for your camera. Tactacam Solo Xtreme
requires UHS Speed Class 3 (U3) to deliver the necessary write speed for cameras
like the Tactacam Solo Xtreme that can shoot 4K and high-bit rate video. U3-certified
SD cards must be able to maintain a minimum write speed of 30MB/s to ensure that
recording continues smoothly without any dropped frames. You can use up to a 64GB
card with the Tactacam Solo Xtreme only.
Note: You should always format your SD card before using it in your Tactacam for the
first time or after it has been used in any other device. Only use high quality microSD
cards. Tactacam SD cards, Lexar, or SanDisk Ultra Extreme are recommended.
Please see more info on SD cards at www.tactacam.com/support
Use one of the following methods to access videos located on your microSD card.
1. Using the provided USB cord connect your Tactacam to your computer. Power on
your camera to allow the computer and camera to communicate. You will see an icon
on your computer desktop (usually named TACTACAM). Open it, any videos taken
with your Tactacam will be in the "Video" folder.
10